Skip to main content
Renesas Electronics Corporation - June is Pride Month, a month to raise awareness of the rights and the culture of the LGBTQ+ community

Features

  • 2.2V to 5.5V input voltage
  • Selectable output voltage range:
    • 0.3V to 1.275V, 5mV steps
    • 0.6V to 1.9V, 10mV steps
  • 1 x 20A quad-phase converter (52A peak output current)
  • 2 x 10A dual-phase converters (26A peak output current)
  • 3MHz nominal switching frequency
  • ±1% accuracy (static)
  • Fast transient response
  • Automatic phase shedding
  • Integrated power switches
  • Remote sensing at point of load
  • I2C compatible interface
  • 1.8V level GPI input support
  • Adjustable soft-start
  • Dynamic voltage control (DVC)
  • -40 °C to +85 ºC temperature range
  • Package: 6x9 WLCSP 2.48mm x 3.68mm (0.4mm pitch)

Description

DA9292 is a high-performance PMIC suitable for supplying high-current rails in CPUs, GPUs, and SoCs across various applications. It supports up to 52A peak current in a compact design with fully integrated power devices.

DA9292 can be configured as either a 20A quad-phase buck converter or two 10A dual-phase buck converters. The input voltage range of 2.2V to 5.5V makes it suitable for a wide range of low-voltage systems, including all single-cell battery-powered systems. Optimized for a small footprint, each phase requires only a 0.10μH inductor. The output voltage is programmable from 0.3V to 1.275V in 5mV steps or from 0.6V to 1.9V in 10mV steps for higher voltage needs. 

The remote sensing capability implemented in DA9292 guarantees the highest accuracy and supports diverse PCB routing scenarios without performance loss. The pass devices are fully integrated, eliminating the need for external FETs or Schottky diodes. It features a soft start-up to limit the inrush current from the input node and secure a slope-controlled activation of the rail. Dynamic Voltage Control (DVC) allows adaptive supply voltage adjustments based on processor load, either via direct register write through the communication interface (I2C compatible) or via an external input pin (VSEL).

DA9292 implements integrated over-temperature and over-current protections for enhanced system reliability, removing the need for external sensing components. The configurable I2C slave ID selection via CONF allows multiple DA9292 instances to be placed in the application sharing the same communication interface with unique addresses.

Parameters

AttributesValue
Qualification LevelStandard
Product TypeMPU
Processor SupplierRenesas
Processor NameRZ G2H, G2M, G2N
Total step-down DC/DC converter channels (#)2
Step-up DC/DC converter Channels (#)0
Input Voltage (Min) (V)2.2
Input Voltage (Max) (V)5.5
Bus Voltage (Max) (V)5.5
Output Current Max (A)20
Outputs (#)2
Function1-ch or 2-ch PMIC
Comm. InterfaceI2C
Battery InterfaceNo
GPIOs (#)0
Integrated Battery ChargerNo
Switching Frequency (MHz)3 - 3

Package Options

Pkg. TypeLead Count (#)Pitch (mm)
WLCSP540.4

Product Comparison

DA9292ISL91302BDA9121DA9122
Outputs (#)1 or 21 or 212
Output Current Max (A)20 or 10+1020 or 10+10105+5
Input Voltage Range2.2 - 5.52.5 - 5.52.5 - 5.52.5 - 5.5
Output Voltage Range0.3 - 1.90.3 - 2.00.3 - 1.90.3 - 1.9

Applications

  • Game console
  • GPU/SoC supply
  • Optical module
Part NumberStatusSamplesStockPackageLead Count (#)Moisture Sensitivity Level (MSL)Qty. per Reel (#)Pb (Lead) FreeTemp. Range (°C)
DA9292-AKOV2ActiveAvailableOut of StockWLCSP54#110000#Yes-40 to +85°C
DA9292-AKOVCActiveAvailableOut of StockWLCSP54#11000#Yes-40 to +85°C
DA9292-APOV2ActiveAvailableOut of StockWLCSP54#110000#Yes-40 to +85°C
DA9292-APOVCActiveAvailableOut of StockWLCSP54#11000#Yes-40 to +85°C

Partner Boards & Kits

SoM/SBC

E1M-X V2N System on Module (SoM)

A high-performance, cost-effective system on module (SoM) for AI-driven vision applications, the E1M-X V2N SoM is based on the Renesas RZ/V2N. It features a quad Arm® Cortex®-A55 CPU (1.8 GHz) and integrated 4K encode/decode, optimized for vision workloads. Supporting up to eight cameras via 2×4-lane MIPI CSI-2, it offers optional Wi-Fi® 6/Bluetooth® 5, flexible memory, storage, and PHY configurations for broad application development.
RZ/V2N,5L35023,DA9292
Alp Lab AB
SoM/SBC

E1M-X V2N-M1

A high-performance, cost-effective system on module (SoM) for AI vision systems, the E1M-X V2N-M1 SoM is powered by the Renesas RZ/V2N with a quad Arm® Cortex®-A55 (1.8 GHz) CPU and a DeepX-M1 AI accelerator delivering 25 TOPS plus 4K encode/decode. Optimized for vision workloads, it supports up to eight cameras via 2×4-lane MIPI CSI-2 and offers optional Wi-Fi® 6/Bluetooth® 5, flexible memory, storage, and PHY options.
RZ/V2N,5L35023,DA9292
Alp Lab AB
Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse Articles

Knowledge Base

Browse our knowledge base for helpful articles, FAQs, and other useful resources.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?