Renesas's crystal oscillators are offered in various frequencies, levels of performance, output types, stability, input voltage, package, pin configuration, and temperature grade. Use the form below to configure a device to meet your specific needs.Submit by Part NumberUsers who wish to submit a request and generate a datasheet addendum based on a part number, may do so here. The part number must be a valid and already existing part number. If the part number being requested does not yet exist, then users will need to fill out the General Configuration Form in order to create it. An entry here will override the selections in the General Configuration. Leave this field blank to use the selections. OR: General Configuration & New Frequency RequestJitter (typical) Typical jitter performance, integrated over the 12 kHz to 20 MHz range. < 750fs to 890fs (AEC-Q200) < 750fs to 890fs < 300fs < 150fs < 60fs Package Device package defined by nominal width and length dimensions. 7 x 5 mm 5 x 3.2 mm 3.2 x 2.5 mm 2.5 x 2 mm 2.0 x 1.6 mm 1.8 x 1.4 mm OE Position Determines the physical position of the output Enable/Disable (E/D) pin. Pin 1 - Active High Pin 1 - Active Low Pin 2 - Active High Pin 2 - Active Low Pin 5 - Active High Voltage Power supply voltage for the crystal oscillator. 3.3 V 2.5 V 1.8 V FselFrequency (Mhz)Output TypeConfiguration 1LowFrequency (MHz) Select Frequency (MHz) Group 1 50 100 125 250 500 Group 2 156.25 312.5 625 1250 Group 3 161.13281 322.265625 644.53125 Group 4 122.88 153.6 307.2 491.52 614.4 983.04 Group 5 106.25 212.5 425 Close group frequency options Output Type Output Type Optional type 1LVDSLVPECLCMLHCSLLVCMOS The output signal type.Configuration 2Float Select Frequency (MHz) Group 1 50 100 125 250 500 Group 2 156.25 312.5 625 1250 Group 3 161.13281 322.265625 644.53125 Group 4 122.88 153.6 307.2 491.52 614.4 983.04 Group 5 106.25 212.5 425 Close group frequency options Output Type Optional type 2LVDSLVPECLCMLHCSLLVCMOS The output signal type.Configuration 3High Select Frequency (MHz) Group 1 50 100 125 250 500 Group 2 156.25 312.5 625 1250 Group 3 161.13281 322.265625 644.53125 Group 4 122.88 153.6 307.2 491.52 614.4 983.04 Group 5 106.25 212.5 425 Close group frequency options Output Type Optional type 3LVDSLVPECLCMLHCSLLVCMOS The output signal type.Duplicated from Config 1 by default, select another value to change. Close tooltip Clear frequency and output selectionFreq (MHz) The fixed output frequency in MHz. Min:0.016Max:1500Output Type The output signal type. LVDS LVPECL CML HCSL HCMOS HCMOSD, 2 outputs, 180° out of phase Stability Total stability of the device, expressed in parts-per-million. ± 100 ppm ± 50 ppm ± 50 ppm APR (VCXO) ± 30 ppm ± 25 ppm ± 20 ppm ± 3 ppm (TCXO) Temperature Determines the temperature grade of the device. -20°C to +70°C -40°C to +85°C -40°C to +105°C Reset Configuration
