Skip to main content
Renesas Electronics Corporation - June is Pride Month, a month to raise awareness of the rights and the culture of the LGBTQ+ community
Alternative(s) Available

Features

  • Zero input - output delay
  • Frequency range 10 - 133 MHz (3.3V)
  • 5V tolerant input REF
  • High loop filter bandwidth ideal for Spread Spectrum applications
  • Less than 200 ps Jitter between outputs
  • Skew controlled outputs
  • Skew less than 250 ps between outputs
  • Available in 8 pin 150 mil SOIC & 173 mil TSSOP packages
  • 3.3V ±10% operation

Description

The IDT91305 is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology to align, in both phase and frequency, the REF input with the CLKOUT signal. It is designed to distribute high speed clocks in communication systems operating at speeds from 10 to 133 MHz.

IDT91305 is a zero delay buffer that provides synchronization between the input and output. The synchronization is established via CLKOUT feed back to the input of the PLL. Since the skew between the input and output is less than +/- 350 pS, the part acts as a zero delay buffer.

The IDT91305 comes in an eight pin 150 mil SOIC package. It has five output clocks. In the absence of REF input, will be in the power down mode. In this mode, the PLL is turned off and the output buffers are pulled low. Power down mode provides the lowest power consumption for a standby condition.

Part NumberStatusSamplesStockPackageLead Count (#)Carrier TypeMoisture Sensitivity Level (MSL)Qty. per Reel (#)Qty. per Carrier (#)Package Area (mm²)Pitch (mm)Pkg. Dimensions (mm)Pb (Lead) FreePb Free CategoryTemp. Range (°C)
91305AGILFObsoleteN/AOut of StockTSSOP8#Tube1096#13.6mm²0.65mm3.1 x 4.4 x 1.0Yese3 Sn-40 to 85°C
91305AGILFTObsoleteN/AOut of StockTSSOP8#Reel12500#013.6mm²0.65mm3.1 x 4.4 x 1.0Yese3 Sn-40 to 85°C
91305AGLFObsoleteN/AOut of StockTSSOP8#Tube1096#13.6mm²0.65mm3.1 x 4.4 x 1.0Yese3 Sn0 to 70°C
91305AGLFTObsoleteN/AOut of StockTSSOP8#Reel12500#013.6mm²0.65mm3.1 x 4.4 x 1.0Yese3 Sn0 to 70°C
91305AMILFObsoleteN/AOut of StockSOIC8#Tube1097#19.1mm²1.27mm4.9 x 3.9 x 1.5Yese3 Sn-40 to 85°C
91305AMILFTObsoleteN/AOut of StockSOIC8#Reel13000#019.1mm²1.27mm4.9 x 3.9 x 1.5Yese3 Sn-40 to 85°C
91305AMLFObsoleteN/AOut of StockSOIC8#Tube1097#19.1mm²1.27mm4.9 x 3.9 x 1.5Yese3 Sn0 to 70°C
91305AMLFTObsoleteN/AOut of StockSOIC8#Reel13000#019.1mm²1.27mm4.9 x 3.9 x 1.5Yese3 Sn0 to 70°C

Support Communities

  1. Build datapump error

    Hello, im trying to build the code from the da14531 datapump in the codeles SDK 6.380.14.22, with Keil, but it shows me the following error:   *** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin' Build target 'codeless_531_datapump' linking... .\out ...

    Oct 1, 2021
Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse Articles

Knowledge Base

Browse our knowledge base for helpful articles, FAQs, and other useful resources.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?