Overview
Design & Development
Software & Tools
Sample Code
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
FAQs
-
How do I put my H8 300SLP device into boot mode ?
To put the device into boot mode you should follow the instructions given in the ROM section of the Hardware manual. The example below shows how to boot the H8/38024F: TEST0 - Low Level.; Port 9.50 - Low Level ; Port 3.41 - High Level.Once these conditions have been ...
Mar 18, 2009 -
How can I output a clock signal?
There are several ways as below. 1. Use PWM 2. Use toggle output of timer 3. Use TMOW pins (its availability depend on each product) 4. Use SCI1 clock continuous output mode 4 (its availability depend on each product). For detailed, please refer to the hardware manual.
Mar 24, 2009 -
Will the WDT also resets if its full when the LSI resets internally?
All functions except for WRST bit of TCSRW (Timer control/status resistor W) are reset. Initialization of WRST bit is performed by external reset pin, not by the overflowing of the WDT.
Mar 24, 2009