1. Home
    2. Microcontrollers and Microprocessors
    3. RX Family

RX610

The RX610 Group is built around the RX core and has enhanced analog, communication, and timer functions.

 

RX610 Group microcontrollers have 100 MHz high-speed operation and large-capacity on-chip memory. The products are equipped with basic functions such as timers and communications functions, as well as four independent units of A/D converter, enabling a fastest conversion time of 0.8 μs.

In addition to a maximum 2 MB flash memory and 128 KB RAM, 32 KB of flash memory for data storage are built in. The RX610 enables a system to be configured without peripheral memory and other devices, greatly reducing the total cost of the system.

 

 

Product Brochures

RX600/RX700 Brochure

Key Features:

ITEM RX610  
CPU core RX CPU
  • General registers: 32-bit x 16
  • Multiplier: 32-bit multiplier
  • Divider: Yes
  • Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
Maximum operating frequency 100MHz
Power supply voltage 3.0 to 3.6V
Floating-point processing unit Single-precision floating-point processing unit
(Supports add/subtract/compare/multiply/divide and other instructions)
Program Flash Max. 2MB
Data Flash 32KB
SRAM 128KB
On-chip peripheral functions
  • Direct memory access controller (DMAC) × 4 channels
  • Data transfer controller (DTC)
  • 16-bit timer pulse unit (TPU) × 12 channels
  • 16-bit compare match timer × 4 channels
  • 8-bit timer (TMR) × 4 channels
  • Serial communication interface (SCI) × 7 channels
  • I2C bus interface × 2 channels
  • A/D converter (10-bit) × 16 channels [4 units: 4 channels/unit]
  • CRC calculator
On-chip debugging function Yes (with trace function)
Low power consumption modes 4 modes
  • Sleep mode
  • All-module clock stop mode
  • Software standby mode
  • Deep software standby mode
Packages PLQP0144KA-A (144-pin LFQFP, 20 x 20mm 0.5mm pitch)
PLBG0176GA-A (176-pin LFBGA, 13 x 13mm 0.8mm pitch)

 

Pin Count / Memory Size Lineup:

Program Flash
SRAM
2MB
128KB
1.5MB
128KB
1MB
128KB
768KB
128KB
Pins
Package
144
LFQFP
176
LFBGA

 

Block Diagram:

RX610 Block Diagram

Below you will find information to support the development of your application.
You can find an explanation of orderable part numbers here.

Resources for Software and Hardware

Title Description
My Renesas Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information, questions and opinions with others who use Renesas products.
Video Watch videos related to this product.

 

Software Design Support

Title Description
CS+ An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)
e2 studio Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.
E1 A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)
Renesas Starter Kit All the development tools you need for MCU evaluation and getting started. Also recommended for training.

 

Hardware Design Support

Title Description
IBIS/BSDL

IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.

BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.

Resonator Information

Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.

 

For main clock resonators : 

KYOCERA: For IC Manufacturer, select Renesas Electronics, and then for IC Family, select RX610. Or, search for R5F5610 in the IC Part Number field.

Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F5610 into the IC Part Number search box.

You can filter the sample codes and application notes that are displayed using the below filters.

Confirm below disclaimers

Input Renesas account name and password

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.

Menu
Contact