Basic Library
Digital I/O
Analog I/O
Advanced I/O
Time
Math
Trigonometry
Random Numbers
Bits and Bytes
Interrupts
Communication
Standard Library
Servo Motor
Stepper
Liquid Crystal
EEPROM
SPI
I2C (Wire)
SD Card
SD Card (File Control)
Ethernet
Ethernet (Server)
Ethernet (Client)
Firmata
Periodic Operation
Power Save
Clock (RTC)
SoftwareSerial
Utility
Utility
The components of the Utility library can be found below.
softwareReset
- Description
- Generate reset.
- Syntax
- void softwareReset()
- Parameters
- None
- Returns
- None
getResetFlag
- Description
- Get the matter of reset.
- Syntax
- uint8_t getResetFlag()
- Parameters
- None
- Returns
- 0x00: External reset or Power on reset
0x01: Low voltage detection
0x02: Illegal memory access
0x04: RAM parity error (read from no initialized area)
0x10: Watch dog timer
0x80: Illegal instruction
getTemperature
- Description
- Get temperature.
- Syntax
- int getTemperature(uint8_t mode)
- Parameters
- mode: Specify TEMP_MODE_CELSIUS in the case of Celsius, specify TEMP_MODE_FAHRENHEIT in the case of Fahrenheit
- Returns
- Temperature(int)
- Comment
- Has a margin of error of 1 degree one way or the other.
Example
This example shows temperature every 1 second.
#include <Arduino.h>
void setup() {
Serial.begin(9600);
}
void loop()
{
Serial.print("Temperature: ");
Serial.println(getTemperature(TEMP_MODE_CELSIUS));
delay(1000);
}