Features
- 120MHz RXv3 core (6.01 CoreMark/MHz*), double-precision FPU, and register bank save function that speeds up interrupt response
- *Typical for RXv3 core
- 2.7V to 3.6V operation, single power supply
- Operating temperature: -40°C to 85°C or -40°C to 105°C
- Large-capacity memory: 2MB code flash, 384KB SRAM
- Dual-bank function convenient for firmware updates
- 8KB data flash that can store data like an EEPROM
- 48-pin to 148-pin package lineup including ultra-small 64-pin TFBGA (4.5mm x 4.5mm)
- Up to 133 general-purpose I/O ports
- SD Host I/F (supports SD memory/SDIO 1 or 4-bit SD bus)
- USB 2.0 Host/Function/OTG (supports full speed (12Mbps), low speed (1.5Mbps), and isochronous transfer)
- CAN (ISO 11898-1 compliant, up to 1Mbps transfer)
- QSPI (support XIP mode)
- Various other communication interfaces (SCI, IIC, RSPI, etc.)
- 16-bit PWM timer, 16-bit/32-bit compare match timer, 8-bit timer, RTC
- 12-bit A/D converter, temperature sensor
- Capacitive touch sensing unit (CTSU)
- Self-capacitive: 1 pin, 1 key configuration for up to 17 keys
- Mutual capacitive: Up to 64 keys in matrix configuration
- Trusted Secure IP enables high level of Root of Trust
- AES, TRNG, RSA, SHA, and ECC encryption engines, key management, flash memory protection
Description
The RX671 group microcontrollers deliver superior real-time performance with the RXv3 core running at 120MHz. The HMI functions enable contactless operation by proximity switches and voice recognition, making it possible to realize hygienic HMI suitable for the new normal. A wide variety of packages, including the 4.5mm x 4.5mm 64-pin TFBGA, is all equipped with 2MB flash memory and 384KB SRAM to meet a wide range of needs with a single chip.
Parameters
Attributes | Value |
---|---|
Main CPU | RXv3 |
Program Memory (KB) | 1024, 1536, 2048 |
RAM (KB) | 384 |
Carrier Type | Full Carton (Tray), Tray |
Supply Voltage (V) | 2.7 - 3.6 |
I/O Ports | 34, 44, 45, 81, 112, 114 |
DRAM I/F | No, SDRAM I/F |
Temp. Range (°C) | Tj = -40 to +105, Tj = -40 to +125 |
Operating Freq (Max) (MHz) | 120 |
Ethernet speed | No |
Ethernet (ch) | 0 |
EtherCat (ch) (#) | 0 |
USB FS (host ch/device ch) | ( 0 / 0 ), ( 0 / 1 ), ( 1 / 1 ), ( 2 / 2 ) |
USB HS (host ch/device ch) | ( 0 / 0 ) |
USB SS (host ch/device ch) | ( 0 / 0 ) |
SCI or UART (ch) | 11, 13, 15 |
SPI (ch) | 14, 17, 19 |
I2C (#) | 14, 17, 19 |
CAN (ch) | 0, 2 |
CAN-FD (ch) | 0 |
Wireless | No |
SDHI (ch) | 1 |
High Resolution Output Timer | No |
PWM Output (pin#) | 22, 24, 38, 39 |
32-Bit Timer (ch) | 3 |
16-Bit Timer (ch) (#) | 18 |
8-Bit Timer (ch) | 4 |
Standby operable timer | No |
12-Bit A/D Converter (ch) | 8, 10, 16, 20 |
24-Bit Sigma-Delta A/D Converter (ch) | 0 |
16-Bit D/A Converter (ch) | 0 |
12-Bit D/A Converter (ch) | 0 |
8-Bit D/A Converter (ch) | 0 |
Capacitive Touch Sensing Unit (ch) | 6, 8, 17 |
Segment LCD Controller | No |
Security & Encryption | Unique ID, Unique ID, AES, 3DES, RSA, ECC, SHA-1, SHA224/SHA256, MD5, MAC, TRNG |
Application Block Diagrams
|
Touchless Button
Touchless button design using capacitive sensing ensures hygiene and reliability in varied settings.
|
Applied Filters:
Filters
Software & Tools
Sample Code
Simulation Models
This video introduces the reference design for serial TFT-LCD QVGA display and capacitive touch functions controlled by a single-chip RX MCU.
For more information, please refer to Serial LCD + Touch Reference Design.
Introducing a solution that enables HMI and cloud connectivity functions on a single chip using the RX671. This solution provides a reference demo for a comprehensive experience of voice recognition, touch keys, and cloud connectivity. Demo software can be downloaded from the Renesas website. For details, refer to the application note "RX671 Group Voice recognition / Touch and Cloud solution using Renesas Starter Kit+ for RX671 Rev.1.00 - Sample Code (ZIP)".