Overview
Description
The DA14531MOD-00DEVKT-P Bluetooth® Low Energy Development Kit Pro for the DA14531 SmartBond TINY™ module includes a motherboard, daughterboard, and cables. This kit is primarily used for software application development and power measurements.
The DA14531 is a family of Bluetooth Low Energy (LE) devices that operate at very low power levels while providing world-class RF performance. This device is available in a small footprint while still offering large flexibility in the configuration of the on-chip interfaces, making it suitable for a wide range of applications.
Features
- Motherboard:
- Slot to connect a DA14531 PRO daughterboard
- Power wiring configurations to allow the DA14531 PRO motherboard to operate in either buck, boost, or bypass modes
- Dedicated hardware for current measurement
- Single USB port to provide power and data interfacing to a PC
- Onboard JTAG debugger
- Virtual 4-wire UART port
- DA14531 RESET line is controlled over JTAG by using an onboard push button
- Onboard 2-Mbit SPI data Flash (MX25R2035)
- Multiple voltage options (1.1V, 1.8V, 3.0V, and 3.3V) to supply the DA14531 System-on-Chip (SoC) on the DA14531 PRO daughterboard
- Support for coin cell battery (battery holder not included)
- User LEDs and push buttons (to be used with a DA14531 FCGQFN24 PRO daughterboard)
- Voltage translation for the JTAG and UART signals allows current leakage during system operation to be eliminated
- Daughterboard (DA14531-00F1DB-P and DA14531-00OGDB-P):
- Embedded printed antenna
- RF port output (connector not included)
- DA14531 power mode configuration switch (only for backwards compatibility with DA1458x DK PRO motherboard)
- Current measurement port to connect external measurement equipment
- Onboard JTAG connector
- Support for coin cell battery (battery holder not included)
Applications
Design & Development
Resources
Support
Support Communities
- Guidance needed: Getting started with DA14531MOD (US159-DA14531EVZ) — building, flashing, and mobile BLE
Hello Team, We plan to use the DA14531MOD in our product and have ordered the US159-DA14531EVZ evaluation board for development. I am new to BLE development and would appreciate guidance on the following points: Which software tools, SDKs, and IDEs should I install to get started (recommended versions and ...
Aug 29, 2025 - DA14531 multi peripheral code
Hello Dialog Support, I am using a DA14531MOD-00DEVKT-P and have connected three devices. I downloaded the latest version of the multiple peripheral example code from the GitHub link in that post: GitHub Link. I am working with SDK version 6.0.22.1401. These are the available BLE ...
Oct 25, 2024 - Problem with deep sleep wake up
Good Morning, I am working with the DA14531MOD-00DEVKT-P board and trying to implement a module that places the device into deep sleep, then wakes it up using a GPIO pin, specifically a GPIO_BUTTON in my case. I followed the instructions provided in this guide: Deep Sleep Configuration ...
Oct 17, 2024
Support Communities
