Overview
Description
The RL78/G13 microcontrollers balance the industry's lowest level of consumption current (CPU: 66 μA/MHz, standby (STOP): 230 nA) and a high performance of 43.2 DMIPS (32 MHz). They have an on-chip oscillator, data flash, A/D converter, and more. Built-in safety features (function that detects illegal operation of hardware) enable support for the household appliance safety standard (IEC/UL 60730). These microcontrollers can be used in a wide variety of applications from home and consumer appliances to industrial equipment.
Features
- CPU: RL78 core, Max. 32MHz
- Voltage: 1.6V to 5.5V
- Package: 64-pin HTFQFP, 24 to 48-pin HWQFN, 48 to 128-pin LFQFP, 44 to 100-pin LQFP, 20 to 30-pin LSSOP, 64-pin VFBGA, 25 to 36-pin WFLGA
- Memory: SRAM Max. 32KB, Program Flash Max. 512KB
- Timer: 16-bit Timer (ch) x 8, 8-bit Timer (ch) x 8, Watchdog Timer (ch) x 1, Interval Timer x 1 ch
- PWM: PWM Output x 7
- Analog function: 10-bit A/D Converter (ch) x 9
- On-chip Oscillator Freq. (MHz): High-Speed: 32, 24, 16, 12, 8, 4, 1MHz
Low-speed: 15kHz - Others: RTC, Power-On Reset, Low Voltage Detection
Comparison
Applications
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
basic learning program for RL78/G13
Somebody please send me some basic program for RL78/G13 i am so much confuse and also how to create delay in this controller tell me this think also.........?
Aug 14, 2012 -
is there Timer RD for RL78/G13?
Hello , I want to know if Timer RD for rl78/g13 is there or not. I am using R5F100GE [locked by: JB (SWF) at 3:22 (GMT 0) on 14 Feb 2022]
Feb 12, 2022 -
rl78/g13 internal rtc
hello, i want to do rtc program bu i am unable to do this can you plz help me i used r5f1006ag controller
Jan 5, 2023
FAQs
-
E0204001, E1200416 Error (CS+, E1, RSK for RL78/G13)
This error occurs when the versions of the monitor program written the RL78/G13 on the CPU Board and E1 debugger monitor program are different. Immediately after the error occured, disconnect the USB cable from the E1 debugger to reset the state of the E1 debugger, then reconnect the ...
Aug 2, 2022 -
Where to find the register that selects the timer output in RL78/G13?
An example of a circuit of the block diagram for pin output of the RL78 is shown. In general, port output and SAU output, TAU output, and other output are assigned to each pin. In the RL78, there is normally no built-in register for switching between these outputs. These ...
Aug 8, 2013 -
Can you provide the header file of RL78/G13?
In the RL78 Family, on-chip peripheral functions are defined in device file format, which is installed when CubeSuite+ is installed. Therefore, it is not necessary to prepare a separate header file. When programming using an assembler (RA78K0R), program using the register names shown in the hardware manual. When programming ...
Jul 31, 2013
News & Blog Posts
Blog Post
Nov 28, 2023
|