Overview
Design & Development
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Resources
Support Communities
-
Flash o' CAN M16C/6NK v1.01
Flash o' CAN M16C/6NK v1.01
Jan 1, 1970 -
UART2 as I2C Slave on M16C/29
UART2 as I2C Slave on M16C/29
Mar 20, 2008 -
MCU test setup question
Hello I am trying create a test setup for M16C/62A MCU. Need help with how to find correct socket part number from a 3rd part for this setup and how to connect emulator user interface to the socket. I know I need a socket for 14x20x0.65 pitch ...
Jul 18, 2024
FAQs
-
(M16C Family products other than the M32C/80 Series, and the M16C/80 Series) Priority level is "0" + Request bit is "1": Priority level to "7"?
The interrupt will be accepted. Then, the interrupt request bit will be cleared. However, if you use the MOV instruction to change the interrupt priority level, the interrupt request bit may be cleared to "0". The interrupt will not be accepted when the interrupt request bit is cleared at this ...
Feb 14, 2006 -
(M32C/80 Series, M16C/80 Series) Priority level is "0" + Request bit is "1": Priority level to "7"?
The interrupt will be accepted. Then, the interrupt request bit will be cleared. However, if you use the MOV instruction to change the interrupt priority level, the interrupt request bit may be cleared to "0". The interrupt will not be accepted when the interrupt request bit is cleared at this ...
Feb 28, 2012 -
(M16C,M32C) Are there any hardware precautions for accurate A/D conversion?
In order to perform A/D conversion, it is necessary to fully charge the internal capacitor, but if the impedance of the A/D conversion target is high, the discharge and charge will take time and the conversion value will not be accurate. For correct A/D ...
Feb 27, 2012