Overview
Description
The ISL99227 and ISL99227B are Smart Power Stage (SPS) compatible with ISL68xxx/69xxx Digital Multiphase (DMP) controllers and phase doubler (ISL6617A), respectively. The ISL99227 and ISL99227B have integrated high accuracy current and temperature monitors that can be fed back to the controller and doubler to complete a multiphase DC/DC system. They simplify design and increase performance by eliminating the DCR sensing network and associated thermal compensation. Light-load efficiency is supported via a dedicated LFET control pin. An industry leading thermally enhanced 5x5 PQFN package allows minimal overall PCB real estate. The ISL99227 and ISL99227B feature a 3.3V compatible, 5.0V compatible tri-state PWM input that, working together with Renesas multiphase PWM controllers, provide a robust solution in the event of abnormal operating conditions. The ISL99227 and ISL99227B also improve system performance and reliability with integrated fault protection of UVLO, over-temperature, and overcurrent. An open-drain fault reporting pin simplifies the handshake between SPS and Renesas controllers and can be used to disable the controller during start-up and fault conditions.
Features
- Input range: +4.5V to +18V
- Supports 60A DC current
- ISL99227 with 3.3V compatible tri-state PWM input
- ISL99227B with 5.0V compatible tri-state PWM input
- Downslope current sensing
- ±3% accuracy current monitor (IMON) with REFIN input
- 8mV/°C temperature monitor with OT flag
- Dedicated low-side FET control input
- Comprehensive fault protection for high system reliability
- High-side FET short and overcurrent protection
- Over-temperature protection
- VCC and VIN Undervoltage Lockout (UVLO)
- Open-drain fault reporting output
- Up to 2MHz switching frequency
- RoHS compliant with Exemption 7a, 32 Ld 5x5 PQFN
Comparison
Applications
Documentation
|
|
|
---|---|---|
Type | Title | Date |
Datasheet | PDF 924 KB | |
Product Advisory | PDF 271 KB | |
Other | PDF 293 KB | |
Product Change Notice | PDF 215 KB | |
Product Change Notice | PDF 212 KB | |
Application Note | PDF 509 KB | |
Application Note | PDF 397 KB | |
7 items
|
Design & Development
Support
Support Communities
Support Communities
-
请问这个问题是什么原因产生的?
目前设计是ISL68127IRAZ搭配5个ISL99227,使用了0,1,2,3,4相位。1.没有配置软件,上电后没有电压输出,按道理,默认电压值0.9V。2.使用 ...
Aug 30, 2021 -
Output assignments to Rail0 and Rail1 of the ISL681xx Multiphase controller
Hello. I'm in the stage of designing a VRM module based on ISL681x7 multiphase controller and ISL99227 SPS. Two outputs, 6+1 Phases scheme. Output with 6 phases (0.85V) must be turned on first, while output with 1 phase (0.9V) must be turned on second in sequence ...
Nov 17, 2020 -
ISL68127 have no PWM output
Hi, I'm using ISL68127 with ISL99227 power stage.I connect my board with ISLUSBEVAL1Z and checked VCC/PVCC/VIN/LGCTRL in ISL99227 is correct. When I enable rail 0 I got no PWM output from the ISL68127. I tested IMON-REFIN = 0V and FAILT# is ...
Mar 16, 2024