Renesas Electronics Corporation
Search

IS-2100ARH

Active

Radiation Hardened High Frequency Half Bridge Drivers

Order Now

Overview

The radiation hardened IS-2100ARH, IS-2100AEH are high-frequency, 130V half-bridge N-Channel MOSFET driver ICs, which are functionally similar to industry-standard 2110 types. The low-side and high-side gate drivers are independently controlled. This gives the user maximum flexibility in dead time selection and driver protocol. In addition, the devices have on-chip error detection and correction circuitry, which monitors the state of the high-side latch and compares it to the HIN signal. If they disagree, a set or reset pulse is generated to correct the high-side latch. This feature protects the high-side latch from single event upsets (SEUs).

IS-2100AEH_IS-2100ARH Functional Diagram
IS-2100AEH_IS-2100ARH Functional Diagram
  • Electrically screened to DLA SMD # 5962-99536
  • QML qualified per MIL-PRF-38535 requirements
  • Radiation environment
  • Maximum total dose: 300krad(Si)
  • DI RSG process provides latch-up immunity
  • SEU rating: 82MeV/mg/cm2
  • Vertical device architecture reduces sensitivity to low dose rates
  • Bootstrap supply maximum voltage to 150V
  • Drives 1000pF load at 1MHz with rise and fall times of 30ns (typical)
  • 1.5A (typical) peak output current
  • Independent inputs for non-half bridge topologies
  • Low DC power consumption: 60mW (typical)
  • Operates with VDD = VCC over 12V to 20V range
  • Low-side supply undervoltage protection

Documentation

Design & Development

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Explore ECAD Models
Diagram of ECAD Models

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Get Support
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Browse FAQs
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?
Submit Ticket

Resources

FAQs

  1. Are there protection diodes internal to the IS-2100ARH / IS-2100AEH between the logic pins and the supply voltage?

    ... 2. If so, is the part protected as long as the current through the protection diode is limited to a safe value? If so, what is a reasonable safe current? Answers: 1: Yes.   2: Yes, the part will be protected as long as the protection diode current is kept to ...

    Jan 1, 1970
  2. IS-2100A Block Diagram and Application Notes

    The total dose report shows a block diagram.   Some of the other test reports show other Figures which may be helpful. The SMD has the electricals and other information.   This IS-2100 device is similar to the HIP2100.  They are manufactured in different processes and are not equivalent, but you ...

    Jul 3, 2025
  3. IS-2100 Model

    We do not have any models for this part or for a similar part.

    May 1, 2025