Overview
Description
The SLG46721 provides a small, low-power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46721. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
Features
- Logic and Mixed-Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four Analog Comparators (ACMP)
- Two Voltage References (Vref)
- Nine Combinatorial Look-Up Tables (LUTs)
- Two 2-bit LUTs
- Seven 3-bit LUTs
- Nine Combination Function Macrocells
- Four Selectable DFF/Latch or 2-bit LUTs
- Two Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or 3-bit LUT
- Two Selectable CNT/DLY or 4-bit LUTs
- Five Counter/Delay Generators (CNT/DLY)
- One 14-bit Delay/Counter
- One 14-bit Delay/Counter with External Clock/Reset
- Three 8-bit Delay/Counters
- Pipe Delay - 16 Stage/3 Output (Part of Combination Function Macrocell)
- Programmable Delay
- Additional Logic Functions
- Two Inverters
- Two Deglitch Filters
- RC Oscillator (RC OSC)
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
SLG46721 Software Simulation
Hello, Greetings!! I have made a design with SLG46721 and simulating it in the software. I'm using two input states. Is it possible to change the input state during the simulation? Thanks in advance. Regards, Janhavi Rane
Apr 26, 2021 -
SLG47004 emulation problem
I proggramed its comparators and opamps to control chip before my mission. I emulated it but i couldn't saw anything at the oscilloscope. I thouht that DIP was the problem but when i tried for slg46721 it properly works. Any recommendation to solve this ?
Oct 17, 2022 -
EDGE DETECT
Does the EDGE DETECT in CNT6/DLY6 of the SLG46721 detect edges of input signal or delayed signal?
Feb 5, 2018