Overview
Description
The SLG46537V/M provides a small, low-power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46537V/M. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
Features
- Logic and Mixed-Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four Analog Comparators (ACMP)
- Two Voltage References (Vref)
- Seventeen Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Continuous DFF/Latch or 3-bit LUT
- Four Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or 3-bit LUT
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Five 8-bit Delays/Counters or 3-bit LUTs
- Two 16-bit Delays/Counters or 4-bit LUTs
- Asynchronous State Machine
- Eight States
- Flexible Input Logic from State Transitions
- Serial Communications
- I2C Protocol Compliant
- Pipe Delay – 16 Stage/3 Output (Part of Combination Function Macrocell)
- Programmable Delay
- Additional Logic Functions – 2 Deglitch Filters with Edge Detectors
- Two Oscillators (OSC)
- Configurable 25kHz/2MHz
- 25MHz RC Oscillator
- Crystal Oscillator
- Power-On-Reset (POR)
- Eight Byte RAM + OTP User Memory
- RAM Memory Space that is Readable and Writable via I2C
- User-defined Initial Values Transferred from OTP
- Analog Temperature Sensor
Comparison
Applications
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
How to write to the SLG46537 virtual outputs via I2C
Hi all, I'm working with a SLG46537 via the Advanced Development Platform, and I'm trying to test the I2C functionality by toggling a LED via the virtual output registers. Could anyone confirm the sequence of writes I have via the I2C generator are correct? I have a Start ...
Feb 4, 2024 -
"Chip is absent or placed incorrectly" after programming SLG46537V
Using the GreenPAK Advanced Development Platform I emulated and programmed an IC. Then, any further attempt to emulate fails with this message. Is this normal? I thought that once a chip was programmed it could still be used for emulation. Confirmed that plugging a fresh chip into the socket works ...
Jul 13, 2019 -
SLG46537BM Part Delivery via Avnet
We have been supplied SLG46537BM via supply chain (via Avnet distribution) whereas we have the Part Number listed as SLG46537MTR. We know that the TR just denotes the Tape & Reel packaging format but we cannot see anywhere on your website what the B suffix prior to the last M ...
Mar 29, 2022