Overview
Description
The SAP5S/SAP51 is a next-generation CMOS integrated circuit for AS-Interface networks. This low-level field bus AS-i (Actuator Sensor Interface) was designed for easy, safe, and cost-effective interconnection of sensors, actuators, and switches. It transports both power and data over the same two-wire unshielded cable.
The SAP5S/SAP51 is used as part of a master or slave node and functions as an interface to the physical bus. It provides the power supply, physical data transfer, and communication protocol handling. The SAP5S/SAP51 is fully compliant with the AS-Interface Complete Specification v3.0. It is function and pin compatible with the SAP4.1 (AS2702). The SAP5S/SAP51 can be programmed by the user to operate in Standard Slave mode, Safety mode (SAP5S only), or Master mode. The special AS-i Safety mode (SAP5S only) assures short response times regarding security-related events.
All configuration data are stored in an internal EEPROM that can be easily programmed by a stationary or handheld programming device. The SAP5S/SAP51 is optimized for harsh environments by its special burst protection circuitry and excellent electromagnetic compatibility.
Features
- Compliant with the AS-Interface Complete Specification v3.0
- Universal application: slaves, masters, repeaters
- Integrated safety code generator (SAP5S only)
- On-chip electronic inductor: 55mA current drive capability
- Two LED outputs to support all AS-Interface Complete Specification v3.0 status indication modes
- User programmable to operation in Standard Slave mode, Safety mode, or Master mode
- Supports 5.33MHz and 16MHz crystals by automatic frequency detection
- Data pre-processing functions
- Clock and communication watchdogs for high system security
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 931 KB | |
| Guide | 7Z 1.21 MB | |
| Manual - Development Tools | PDF 1.50 MB | |
| Schematic | PDF 107 KB | |
| Product Brief | PDF 174 KB | |
| Technical Brief | PDF 343 KB | |
| Application Note | PDF 644 KB | |
| Manual - Development Tools | PDF 279 KB | |
8 items
|
||
Design & Development
Software & Tools
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
ASI4U-V5, how to configure it into an ASi-3 Slave?
Hello,I have a question regarding the Y-ASI4U-V5-DB_V1_1 and/or ASI4U-V5This device is advertised as being back compatible with ASI-3.The starter kit comes with a Qt program, (ASI4U-V5 Dataflash Generator 2.0) - which can generate the configuration binary file which ...
Oct 4, 2023