Overview
Description
The 7132 is a high-speed 2K x 8 Dual-Port Static RAM designed to be used as a stand-alone 8-bit Dual-Port RAM or as a "MASTER" Dual-Port RAM together with the 7142 "SLAVE" Dual-Port in 16-bit-or-more word width systems which would result in full-speed, error free operation without the need for additional discrete logic. An automatic power down feature, controlled by CE, permits the on chip circuitry of each port to enter a very low standby power mode. Military grade product in compliance with MIL-PRF-38535 QML is available.
Features
- True Dual-Ported memory cells which allow simultaneous access of the same memory location
- On-chip port arbitration logic
- BUSY output flag
- Battery backup operation–2V data retention (LA only)
- TTL-compatible, single 5V ±10% power supply
- Available in 48-pin DIP, LCC and Ceramic Flatpack, and 52-pin PLCC packages
- Industrial temperature range (–40C to +85C) is available
Comparison
Applications
Design & Development
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
DA14680 FCC Scripting
I am scheduled for FCC testing on a chip down design with the DA14680 SoC. I had planned on putting the device in Direct Test Mode and use HCI commands to exercise the radio for the lab. It turns out that their Bluetooth Tester does not support Direct Test Mode ...
Sep 29, 2016 -
deep sleep mode clarification
Dear Dialogue Support, I need to clarify a few points before burnning OTP. Background: we are going to use DA14580 + external flash (containing 2 copies of image, product header and persistence data). The device will remain in deep sleep until it is commissioned and connected. Once connected, it will use ...
Sep 16, 2016 -
Current in sleep mode
Hello, I was testing the extended sleep mode with the DA14580 and it works, but the current consumption was 350 uA, and not 1.4 uA, as expected For this test I followed the instructions of the Training_04_sleep_modes_current_measurement.v10.pdf. I am using the pro ...
Sep 29, 2016