Overview
Description
Timing Commander™ is an innovative Windows™-based software platform enabling system design engineers to configure, program, and monitor sophisticated timing devices with an intuitive and flexible graphical user interface (GUI). The support tool empowers customers to expedite development cycles and optimize the configuration of Renesas's industry-leading clocking solutions.
The Timing Commander platform is designed to serve user-friendly configuration interfaces, known as personalities, for various products and product families. With a few simple clicks, the user is presented with a comprehensive, interactive block diagram offering the ability to modify desired input values, output values, and other configuration settings. The software automatically makes calculations, reports status monitors, and prepares register settings without the need to reference a datasheet. The tool also automatically loads the configuration settings over USB to an evaluation board for immediate application in the circuit. Once the device has been configured and tuned for optimal system performance, the configuration file can be saved for factory-level programming prior to shipment.
Product Personality Downloads
Timing Commander product personality files are available for download from the product page specific to your device. Type your product number in the search bar to find the product page. The file download is located in the Documentation & Downloads section of that page.
Features
- Supported by dozens of popular timing products
- Interactive block diagram with click-to-toggle parameters
- Software provides detailed information about fields without the need to reference the datasheet
- Fractional input syntax avoids issues with infinite decimals
- Allows protection of input fields once they've been set
- Directly view and modify register setting individually or collectively
- Device-dependent advanced features include ability to generate phase noise plots, generated schematic symbol and termination circuit, and calculated power consumption
Release Information
Timing Commander System Requirements:
- Windows XP SP3 or later
- Processor: Minimum 1GHz
- Memory: Minimum 512MB, recommended 1GB
- Available Disk Space: Min 600MB (1.5GB 64bit), recommended 1GB (2GB 64bit)
- Network access during installation if the .NET framework and SQL compact are not currently installed on the system.
- Windows Administrative permissions to install software.
- USB 2.0 interface. The evaluation board USB module is not compatible with USB 3.0. The hardware drivers are automatically installed during the Timing Commander installation.
Target Devices
Videos & Training
Description
IDT's innovative support tool, Timing Commander™, expedites development cycles by empowering customers to program sophisticated timing devices with an intuitive and flexible Graphical User Interface. IDT's Timing Commander is a Windows™-based platform designed to serve user-friendly configuration interfaces, known as personalities, for various IDT products and product families. With a few simple clicks, the user is presented with a comprehensive, interactive block diagram offering the ability to modify desired input values, output values, and other configuration settings. The software automatically makes calculations, reports status monitors, and prepares register settings without the need to reference a datasheet. The tool also automatically loads the configuration settings over USB to an IDT evaluation board for immediate application in the circuit. Once the device has been configured and tuned for optimal system performance, the configuration file can be saved for factory-level programming before shipment. For more information about Timing Commander, visit our Timing Commander page.
News & Blog Posts
Support
Support Communities
- Timing Commander only programming Config 0....
I'm using Timing Commander v1.17 to program a 5P49V6965 using the recommended FTDI cable on a custom board but for some reason I can only program Config 0? I made an error in my initial configuration, so I have been attempting to program one of the other configuration ...
Jan 5, 2024 - VersaClock5 family (5P49V59) Personality files for Timing Commander
I'm evaluating chips from the VersaClock5 family (5P49V59.. ) for a possible use in our application.I've downloaded the Timing Commander Tool. How do I obtain a Timing Command Personality File for the VersaClock5 family ? [locked by: Sai (SWF) at 12:15 (GMT 0) on 13 Jun 2022]
Apr 29, 2022 - 5P49V60 with IDT Timing commander wrong output frequency
I have 5P49V60 (on Sparkfun module). I've downloaded and installed IDT timing commander (v 1.17), downloaded "VersaClock 6E Timing Commander Personality File v1.4.1". Sparkfun module have 16MHz XTAL on board. I've configured IDT Timing Commander (further on IDT) to:- generate 64MHz on output 4- generate ...
Nov 23, 2022
Knowledge Base
- Timing Commander - Execution Error Message: 0x800401D0
Example Message: System.Runtime.InteropServices.COMException (0x800401D0): OpenClipboard Failed (Exception from HRESULT: 0x800401D0 (CLIPBRD_E_CANT_OPEN))Cause: Timing Commander requires write permission when it accesses a personality file. The personality file was placed in a restricted folder, such as the Programs folder, that does not allow file modifications. Fix ...
Oct 31, 2016 - Timing Commander - Installation Error Message: You must be logged into the IDT network in order to install the application
Cause: the user has attempted to install a version of Timing Commander that is for IDT Internal Use Only. Fix: please download the public version of IDT's Timing Commander software here: https://www.renesas.com/us/en/software-tool/timing-commander
Oct 31, 2016 - Timing Commander - Installation Error Message: Error 0x80072ee7:
Example Message: Error 0x80072ee7: Failed to send request to URL: https://download.microsoft.com/download/0/5/D/05DCCDB5-57E0-4314-A016-874F228A8FAD/SSCERuntime_x86-ENU.exeCause: the installer has failed to download the .NET or Runtime SQL installers. This may be ...
Oct 31, 2016
Support Communities
