Overview

Description

The F6522 is an 8-channel transmit active beamforming RFIC designed for application in Ka-Band SATCOM planar phased array antennas. The IC has a single common RF input port and eight output channels. The eight independently controlled output channels can drive eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA). Each channel has 6-bits of digital phase control covering 360° and 25dB of gain control with a minimum step size of 0.2dB, enabling precise beam pattern and polarization control. Operating from a single supply of 2.1–2.5V, the RFIC has 28dB of nominal small signal gain with a typical P1dB of 11dBm per channel.

The device is highly efficient and features a low power standby mode as well as independent enable controls on every channel. The device SPI bus and control pins operate from standard 1.8V logic at speeds up to 50MHz. Advanced digital modes and large on-chip memory allows for < 100ns beam position switching times at the array level, greatly reducing dead time and latency. Finally, the compact and CTE-matched FCCSP organic package with all single-ended 50Ω matched RF ports greatly simplifies the physical integration of these devices onto large antenna panels.

Features

  • 27.5–31.0 GHz operation
  • Supports 4 dual-polarized elements or 8 single-polarized
  • 360° phase control with 6-bit resolution
  • 25dB gain control with 0.2dB minimum step
  • 28dB small signal gain
  • 11dBm output P1dB
  • 2.3V nominal single supply input
  • Standard 1.8V digital logic
  • Temperature compensation
  • Temperature sensor w/ digital readout
  • Advanced digital modes with fast beam steering
  • On-chip beam-state memory
  • 3.8 × 4.6 × 0.9 mm 62-pin FCCSP package

Applications

Documentation

Title Type Date
PDF1.54 MB
Datasheet
PDF2.19 MB
Guide
PDF3.48 MB
Guide
PDF1.08 MB
Product Brief
PDF728 KB
Product Brief

Design & Development

Software & Tools

Software Downloads

Title Type Date
ZIP3.86 MB
Software & Tools - Evaluation Software

Boards & Kits

Boards & Kits

Models

Support

Videos & Training

Active Beamforming ICs and LNAs for Satcom and Radar Phased Array Antennas

An overview of the next-generation portfolio of active beamforming solutions with lowest NF and power consumption for Satcom and Radar antennas.