概要
説明
The ISL9111 and ISL9111A provide a power supply solution for single-cell, dual-cell, or three-cell alkaline, NiCd or NiMH battery-powered applications. The device has a typical 0.8V start-up voltage and is capable of supplying up to 5.25V output voltage. Both devices are guaranteed to supply 100mA from a single-cell input and 240mA from a dual-cell input when output is 3.3V. High 1.2MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the solution.
The ISL9111 and ISL9111A are internally compensated, fully integrated synchronous boost converters optimized for efficiency with minimal external components. At light load, the device enters skip mode and consumes only 20µA of quiescent current, resulting in higher efficiency at light loads and maximum battery life.
The ISL9111 and ISL9111A address both rechargeable and non-rechargeable battery applications. The ISL9111 has a UVLO feature, which will internally shut off at 0.7V protecting a rechargeable battery. The ISL9111A has this feature disabled to maximize the usable life of a non-rechargeable single cell battery. The parts are available in fixed 3.0V, 3.3V and 5.0V output voltage versions or an adjustable output voltage version (ADJ). The fixed output voltage version also provides a FAULT pin for fault condition monitoring. The ISL9111 and ISL9111A are available in a 6 Ld SOT-23 package.
特長
- Up to 97% Efficiency at Typical Operating Conditions
- Minimum Start-up Voltage
- 0.8V (ISL9111)
- 0.6V (ISL9111A)
- Minimum Operating Voltage
- 0.7V (ISL9111)
- 0.5V (ISL9111A)
- Low Quiescent Current: 20μA (Typical)
- At VOUT = 3.3V
- 100mA Output Current @ VIN = 0.9V
- 240mA Output from @ VIN = 1.8V
- Logic Control Shutdown (Iq < 1µA)
- Output Voltage Up to 5.25V
- Output Disconnect During Shutdown
- Skip Mode Under Light Load Condition
- Undervoltage Lockout (ISL9111 Only)
- Fault Protection: OVP (ADJ Version Only), OTP, Short Circuit
- 6 Ld SOT-23 Package
製品比較
アプリケーション
ドキュメント
|
|
|
---|---|---|
分類 | タイトル | 日時 |
データシート | PDF 1.40 MB | |
アプリケーションノート | PDF 592 KB | |
アプリケーションノート | PDF 509 KB | |
アプリケーションノート | PDF 397 KB | |
4件
|
設計・開発
ボード&キット
心拍数、呼吸数、血中酸素飽和度(SpO2)評価キット(RL78 16ビットプロセッサとOLEDディスプレイ搭載)
心拍数、呼吸数、血中酸素飽和度(SpO2)評価キットは、反射型PPG(光電式脈波記録法)にルネサスのOB1203生体センサを使用しています。 本評価キットは、提供されたアルゴリズムを使用して、心拍数、呼吸数、および血中酸素飽和度(SpO2)を測定できます。OB1203センサは、データ分析と結果表示のために、I2Cインタフェースを介してMCUにデータを送信します。この設計には、MCUとしてRL78/G13 16ビットマイクロコントローラ、バッテリ駆動用のISL9111 昇圧コンバータ、およびOLEDディスプレイが組み込まれています。
Heart Rate, SpO2 and Respiration Rate Evaluation Kit with Bluetooth® Low Energy
This evaluation kit includes:
- Renesas OB1203 reflective photoplethysmography (PPG), proximity (PS) sensor
- Dialog DA14531MOD SmartBond TINY™ Module for MCU+BLE
- Renesas ISL9111 DC-DC boost converter
This OB1203SD-BT2-EVK evaluation kit for heart rate, oxygen saturation (SpO2) and...
モデル
ECADモデル
SamacSysの回路図シンボル、PCBフットプリント、および3D CADモデルは、製品オプションテーブルのCADモデルリンクをクリックすることで参照できます。シンボルまたはモデルが対応していない場合は、SamacSysに直接リクエスト可能です。

製品選択
適用されたフィルター