Overview

Description

The 70T3399 is a high-speed 128K x 18 bit synchronous Dual-Port RAM that has been optimized for applications having unidirectional or bidirectional data flow in bursts. An automatic power down feature, controlled by CE0 and CE1, permits the on-chip circuitry of each port to enter a very low standby power mode. The 70T3399 can support an operating voltage of either 3.3V or 2.5V on one or both ports, controllable by the OPT pins. The power supply for the core of the device (VDD) is at 2.5V.

Features

  • Dual-Port allows simultaneous access of the same memory location
  • Selectable Pipelined or Flow-Through output mode
  • Counter enable and repeat features
  • Dual chip enables allow for depth expansion without additional logic
  • Interrupt and Collision Detection Flags
  • Full synchronous operation on both ports
  • Separate byte controls for multiplexed bus and bus matching compatibility
  • Dual Cycle Deselect (DCD) for Pipelined Output Mode
  • 2.5V (±100mV) power supply for core
  • LVTTL compatible, selectable 3.3V (±150mV) or 2.5V (±100mV) power supply for I/Os and control signals on each port
  • Available in a 256-pin BGA and 208-pin fpBGA packages
  • Includes JTAG functionality
  • Industrial temperature range (-40C to +85C) is available

Documentation

Title Type Date
PDF541 KB
Datasheet
PDF198 KB
Application Note
PDF156 KB
Application Note
PDF225 KB
Application Note
PDF97 KB
Application Note
PDF154 KB
Application Note
PDF112 KB
Application Note
PDF70 KB
End Of Life Notice
PDF123 KB
Guide
PDF24 KB
Product Change Notice
PDF194 KB
Product Change Notice
PDF729 KB
Product Change Notice
PDF290 KB
Product Change Notice
PDF80 KB
Product Change Notice
PDF38 KB
Product Change Notice
PDF26 KB
Product Change Notice
PDF197 KB
Product Change Notice
PDF150 KB
Product Change Notice
PDF65 KB
Product Change Notice

Design & Development

Software & Tools

Software Downloads

Title Type Date
PDF70 KB
End Of Life Notice

Models

Models

Title Type Date
Model - BSDL
Model - VHDL
Model - Verilog

Support