Overview
Description
The demand for smart locks is a rapidly growing segment for the home and building automation industries. These locks need to be able to communicate with a smart home or building via fingerprint recognition and/or with a mobile phone using a common wireless communication protocol such as Bluetooth®, Wi-Fi, or near-field communication (NFC). The GreenPAK™ family of cost-effective NVM programmable devices provides features such as a motor driver and LED control. The high-performance, low pin count, 32-bit MCU is available to design in a fingerprint module for algorithm support.
System Benefits:
- Multiple wireless communication supported
- Smallest and lowest power Bluetooth 5.1 system-on-chip (SoC)
- Ultra-low power Wi-Fi SoC for battery-powered IoT devices
- Highly integrated NFC reader IC
- High-performance 120MHz low-pin MCU for fingerprint module
- Programmable mixed-signal matrix enables innovators to integrate many system functions into a single custom circuit
Comparison
Applications
Available on Lab on the Cloud - Use our PC-based GUI to instantly start configuring and testing.
Launch Lab on the CloudMCU
Products
MCU
Products
NFC
Products
HVPAK
Products
Bluetooth Low Energy
Products
Wi-Fi
Products
Bluetooth Low Energy + Wi-Fi
Products
GreenPAK
Products
Haptic Driver
Products
Exiting Interactive Block Diagram
Related Boards & Kits
Development
CN058-WIFILOCKPOCZ
Active
Smart Lock with AWS IoT Development Kit
The demand for smart locks is a rapidly growing segment for the home and building automation industries. This smart door lock solution features fingerprint control and low-power Wi-Fi, providing convenient fingerprint recognition, as well as on-site and remote lock open/close. The solution uses...
Recommended Documents:
Test this Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Videos & Training
A Modular Approach to Building a Smart Lock in Minutes
Using Renesas’ Quick Connect Platform, developers can build a rapid prototype that scales from a simple fingerprint-accessible lock to a Wi-Fi, and NFC-enabled door lock. By leveraging industry-standard interfaces, it’s seamless to mix and match processing, sensing, and connectivity products based on application needs. This video showcases how you can build a modular smart lock, with multiple ways to grant door access, in just minutes!
Video List
News & Blog Posts
Blog Post
Apr 15, 2024
|