Low pin count, compact, low power general-purpose microcontrollers recommended for small electronic devices and sub-microcontrollers
RL78/G10 microcontrollers realize the industry's lowest level of consumption current (CPU: 46 μA/MHz, standby (STOP):
560 nA). With an on-chip oscillator, A/D converter, comparator, and more, and a 10/16-pin package lineup, they support more compact system size. These low pin count microcontrollers are perfect for small consumer electronics.
|CPU Core||RL78 core|
|Program Flash||1 to 4 KB|
|SRAM||128 to 512 bytes(Non parity)|
|Max. Frequency||20 MHz@2.7 to 5.5 V / 5 MHz@2.0 to 5.5 V|
|High-speed system clock||-||X1,X2(Crystal/Ceramic) oscillation, External main system clock input(EXCLK) : 1to 20 MHz@2.7 to 5.5 V / 1to 5 MHz@2.0 to 5.5 V|
|High-speed internal oscillator||20 MHz +/- 2 %|
|Low-speed internal oscillator(for WDT)||15 KHz +/- 15 %|
|CMOS I/O||6 (N-ch O.D. output:2)||10 (N-ch O.D. output:4)|
|Timers||16-bit (TAU)||2 channels||4 channels|
|12-bit interval||-||1 channel|
|Watchdog (WDT)||1 channel (no window function)|
|Timer output||2 (PWM output:1)||4 (PWM output:3)|
|Serial Interfaces||CSI:1 ch/Simple-I2C:1 ch UART:1 ch||1 unit||-|
|CSI:2 ch/Simple-I2C:1 ch/UART:1 ch||-||1 unit|
|I2C bus||-||1 channel|
|8/10-bit resolution A/D converter||4 channels||7 channels|
|Selectable Power On Reset (SPOR)||Provided|
|Power source pins||VDD/VSS(no REGC pin)|
|Safety functions||WDT(no window function),TRAP instruction|
|On-chip debug function||Provided|
|Voltage||2.0* to 5.5 V (Flash memory rewritable voltage 4.5 to 5.5 V)|
|Operating ambient temperature||Ta = -40 to 85 ℃|
* Use this product within the voltage range from 2.25 to 5.5 V because the detection voltage (VSPOR) of the selectable
power-on-reset (SPOR) circuit should also be considered.
*1) 16-pin product only, *2) Use this product within the voltage range from 2.25 to 5.5 V because the detection voltage (VSPOR) of the selectable power-on-reset (SPOR) circuit should also be considered.
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2 studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
Hardware Design Support
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.