Skip to main content

Overview

Description

Low noise and high performance are key words describing the unity gain stable HA-5104/883. This general purpose quad amplifier offers an array of dynamic specifications including 1V/μs slew rate (min), and 8MHz bandwidth (typ). Complementing these outstanding parameters are very low noise specifications of 4. 3nV/√Hz at 1kHz (typ) or 6nV/√Hz (max). Fabricated using the Renesas standard high frequency D. I. process, these operational amplifiers also offer excellent input specifications such as 2. 5mV (max) offset voltage and 75nA (max) offset current. Complementing these specifications are 100dB (min) open loop gain and 55dB channel separation (min). Economically, the HA-5104/883 also consumes a very moderate amount of power (225mW per package) while also saving board space and cost. This impressive combination of features make this amplifier ideally suited for designs ranging from audio amplifiers and active filters to the most demanding signal conditioning and instrumentation circuits.

Features

  • This Circuit is Processed in Accordance to MIL-STD- 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
  • Low Input Noise Voltage Density at 1kHz 6nV/√Hz (Max), 4.3nV/√Hz (Typ)
  • Slew Rate 1V/µs (Min), 3V/µs (Typ)
  • Unity Gain Bandwidth 8MHz (Typ)
  • High Open Loop Gain (Full Temp) 100kV/V (Min), 250kV/V (Typ)
  • High CMRR, PSRR (Full Temp) 86dB (Min), 100dB (Typ)
  • Low Offset Voltage Drift 3µV/°C (Typ)
  • No Crossover Distortion
  • Standard Quad Pinout

Comparison

Applications

  • High Q Active Filters
  • Audio Amplifiers
  • Integrators
  • Signal Generators
  • Instrumentation Amplifiers

Documentation

Type Title Date
Datasheet PDF 222 KB
Application Note PDF 263 KB
Other PDF 519 KB
Product Change Notice PDF 323 KB
Product Advisory PDF 282 KB
Product Change Notice PDF 174 KB
Product Change Notice PDF 151 KB
Application Note PDF 357 KB
Application Note PDF 224 KB
9 items

Design & Development

Models

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Diagram of ECAD Models

Product Options

Applied Filters: