1. Home
    2. Software and Tools
    3. Tools

E100

E100 is an in-circuit emulator equipped with full bus trace. E100 requires only the replacement of MCU unit and accessories for accommodating different MCUs, thus eliminating the need for purchasing another emulator or emulator software for each field of application. With its superb versatility, you can now configure a debugging environment for a wide array of MCUs at a minimum cost without compromising the evaluation accuracy and operation efficiency.

 

More fully featured than its preceding models, the E100 emulator exhibits a wide range of new and enhanced functions including 4M trace, improved filtering, real-time profiling and detection of stack access violation.

  

Release Information

RX E100 Emulator Software

Latest Ver.: V.1.00 Release 00
Released: Sep 16, 2010

M16C R8C E100 Emulator Software
Latest Ver.: V.1.03 Release 02
Released: Jan 16, 2012

H8SX E100 Emulator Software
Latest Ver.: V.1.01 Release 00
Released: Aug 16, 2010

H8S/Tiny H8S/2400 E100 Emulator Software
Latest Ver.: V.2.00 Release 00
Released: Aug 1, 2010

 

Emulator software is bundled in the MCU unit (Sold Separately).

Details of upgrade (Tool News)

Operating Environment

 

Funcionalidades

  • Easy-to-use GUI (Graphical User Interface)
  • Simple Drag&Drop operation
  • Extensive debug functions provided including C language/Assembly source-level debugging
  • Real-time RAM monitoring
  • Real-time tracing, Time measurement and other advanced features
  • Requires only the MCU unit (optional) replacement for use with another MCU.
  • Debugging and various other features added or enhanced from the previous model.
Features E100
(M16C/64, M16C/64A, M16C/65)
Our items
(M16C/62P)
System configuration E100Emulator + MCU unit PC7501Emulator (Discontinued Product) + Emulation probe
Maximum operating clock frequency 133MHz 66.7MHz
Software break 4096 points 64 points
Hardware break maximum 16 points 8 points
Exception event detection Access protect
Detection of skipped initialization
Detection of stack access violation
* Detection of stack access violation not supported for M16C/64 Group
Access protect
Multi-purpose events Hardware break
Trace
Time measurement
16 events can be assigned freely to the above functions.
-
Real-time trace Trace range : 4M cycles
Trace data : Bus (Address, Data, Status), Time stamp, External trigger signal
*External trigger cable is sold separately.
Trace modes : Free/Full/Point & Delay (65,535 times of delay count)/Repeat(Free/Full)
Can be recorded ON/OFF by events
Trace range : 256K cycles
Trace data : Bus, External trigger, and Time stamp
Five trace modes : Break/Before/About/After/Full
Real-time RAM monitor 16K bytes (512 bytes × 32 blocks)
Data / Last access result (Read/Write/Non-access)
Detection of skipped initialization
4K bytes (256 bytes × 16 blocks)
Data / Last access result (Read/Write/Non-access)
Execution time measurement Execution time between the start and the stop of the program. Maximum/minimum/average execution time and pass count (32-bits counter) at the specified 8 segments. Execution time between the start and the stop of the program. Maximum/minimum/average execution time and pass count (32-bits counter) at the specified 4 segments.
Coverage C0 coverage : 2MB area, excludes pre-fetch (256K bytes × 32 blocks)
Data coverage :512KB area (64K bytes × 8 blocks)
8,192K bytes (256K bytes × 32 blocks)
Real-time profile Accumulated time of execution and frequency of calling can be measured for up to 8K functions at the specified segments (128 bytes x 8 blocks). N/A
PC Interface USB (USB2.0 high-speed) LAN (10BASE-T)
USB (USB 1.1, Full-speed)
LPT Parallel
External Trigger Input / Event Output 32 signals (Input level : CMOS or TTL, Output level : CMOS)
The upper 16 bits are used exclusively for input , whereas the remaining 16 bits can be switched between input and output.
*External trigger cable is sold separately.
External trigger input (MCU-dependent-voltage CMOS level × 8) or Event output (Break × 1, event × 7)

Functions

The Simple & Sophisticated GUI

 

Drag & Drop Settings

 

  • Events can be automatically set using Drag & Drop from other windows.

Trace Mode Settings

  • Graphic display of conditions provides clear image of entire setting, enabling intuitive operations

4M Cycle Large Capacity Trace & More Enhanced Real-time Trace Functions!

 

New Trace Mode Added

 

  • Repeat mode is a new feature added to the existing modes. It can quickly detect problems that occur during repeated process.

Easier Display of Trace Results

 

  • Function execution history shows function/task call relationship (call source/ call destination) and enables the user to quickly grasp overall program flow.

Real-time Profile

 

  • Real-time profile function provides easy detection of bottlenecks by measuring execution time of up to 8K functions.
  • Measurment possible without stopping user program.
  • Supports profile function per task as well as per funciton.

C1 Coverage

 

  • In addition to State Coverage (C0 Coverage), Branch Coverage (C1 Coverage) is also supported to facilitate evaluation process.

*C1 Coverage is not supported for H8S/Tiny Series.

  • The measurement result can be saved and be merged during the next measurement.

Specifications

MCUs Supported ・RX Family RX600 Series RX610 Group
・R8C Family R8C/5x Series R8C/3x Series
・M16C Family M16C/60 Series, M16C/50 Series
・H8SX Family H8SX/1700 Series
・H8S Family H8S/2400 Series H8S/2427, H8S/2425 Group
・H8S/Tiny Series
・RS-4 Series
Maximum operating clock frequency 133MHz
Software break 4096 points
Hardware break Max.16 points
(Execution address/Bus detection/Interrupt/External trigger signal Note1)
Hardware break condition ・OR/AND(simultaneous) / AND(Accumulation)/Subroutine/Sequential/State transition
・Pass counts : 255 times
Exception event detection

・Access protect
・Detection of stack access violation Note2

・Detection of skipped initialization

Real-time trace ・Trace range : 4M cycles × 192-bit
・Trace data : Bus (Address, Data, Status), External trigger signal Note1, and Time stamp
・Trace modes : Free/Full/Point & Delay (65,535 times of delay count)/Repeat (Free/Full)
・Can be recorded ON/OFF by events
Real-time RAM monitor ・16K bytes (512 bytes × 32 blocks)
・Data / Last access result (Read/Write/Non-access)
Execution time measurement ・Execution time between the start and the stop of the program.
・Maximum/minimum/average execution time and pass count (32-bits counter) at the specified 8 segments.
Real-time Profile Note3 Accumulated time of execution and frequency of calling can be measured for up to 8K functions at the specified segments (128 bytes x 8 blocks).
Coverage Note3, Note4 ・C0 coverage : 2MB area, excludes pre-fetch (256K bytes × 32 blocks)
・C0/C1 coverage : 1MB area (128K bytes × 8 blocks)
・Data coverage :512KB area (64K bytes × 8 blocks)
External Trigger Input / Event Output Note1 32 signals (Input level : CMOS or TTL, Output level : CMOS)
The upper 16 bits are used exclusively for input , whereas the remaining 16 bits can be switched between input and output.
PC Interface USB2.0 high-speed
Connection to the user system Note5 Via MCU unit (optional)
AC supply voltage for emulator unit Supplied by the attached AC adapter
Emulator Main Unit Size (mm) 73(W) × 184(D) × 132(H)
Conformance with overseas standards ・European Standards: EN 55022 Class A, EN 55024
・US FCC Standard: FCC part 15 Class A

Notes:

  1. External trigger cable is sold separately.
  2. Not supported for the M16C/64 group and RX600 series.
  3. The profile function and the coverage function cannot be set at the same time. C1 coverage is not supported for the H8S/Tiny series.
  4. The code coverage applicable to the E100 emulator for the RS-4 Series is 4MB (1MB x 4 blocks).
  5. The E100 emulator for the RS-4 Series is connected to the user system via IC-CARD-BOARD attached to the MCU unit.

 

Componentes

  • Emulator main unit (E100)
  • AC adapter (100-240V, 50/60Hz)
  • AC power cable
  • USB interface cable

 

 

Configuração do sistema

  

Option products

E100 emulator system is composed of the products below.

  • E100
  • MCU Unit (varying depending on target MCUs.)(sold separately)
  • Converter Board (varying depending on target MCUs.)(sold separately)

 

  

[RX Family  RX600 Series]

RX610 Group
MCU package System Configuration
144-pin 0.5mm-pitch LQFP
PLQP0144KA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit
R0E556100MCU00
・Converter Board R0E556100CFK00
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[R8C Family  R8C/5x Series]

R8C/54E, R8C/54F, R8C/54G, R8C/54H Groups
MCU package System Configuration
48-pin 0.5mm-pitch LQFP
PLQP0048KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E521500MCU00
・Converter Board R0E53054ECFK60
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/56E, R8C/56F, R8C/56G, R8C/56H Groups
MCU package System Configuration
64-pin 0.5mm-pitch LQFP
PLQP0064KB-A

Click here for usage examples. 
・E100 R0E001000EMU00
・MCU Unit R0E521500MCU00
・Converter Board R0E53036ACFK40
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[R8C Family  R8C/3x Series]

R8C/38A, R8C/38C, R8C/38M, R8C/38E, R8C/38F, R8C/38G, R8C/38H, R8C/38W, R8C/38X, R8C/38Y, R8C/38Z Groups
MCU package System Configuration
80-pin 0.5mm-pitch LQFP
PLQP0080KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53038ACFK30
・Extension Flexible Cable  Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/36A, R8C/36C, R8C/36M, R8C/36E, R8C/36F, R8C/36G, R8C/36H, R8C/36W, R8C/36X, R8C/36Y, R8C/36Z Groups
MCU package System Configuration
64-pin 0.5mm-pitch LQFP
PLQP0064KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53036ACFK40
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/35A, R8C/35C, R8C/35D, R8C/35M Groups
MCU package System Configuration
52-pin 0.65mm-pitch LQFP
PLQP0052JA-A

Click here for usage examples.
・E100
R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53035ACFJ50
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/34E, R8C/34F, R8C/34G, R8C/34H, R8C/34P, R8C/34R, R8C/34W, R8C/34X, R8C/34Y, R8C/34Z Groups
MCU package System Configuration
48-pin 0.5mm-pitch LQFP
PLQP0048KB-A

Click here for usage examples.

・E100

R0E001000EMU00
・MCU Unit
R0E521300MCU00
・Converter Board R0E53034ECFK60
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/33A, R8C/33C, R8C/33D, R8C/33M Groups
MCU package System Configuration
32-pin 0.8mm-pitch LQFP
PLQP0032GB-A

Click here for usage examples.
・E100 R0E521300MCU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53033ACFG90
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/32A, R8C/32C, R8C/32D, R8C/32M Groups
MCU package System Configuration
20-pin 0.65mm-pitch LSSOP
PLSP0020JB-A

Click here for usage examples.
・E100 
R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53032ACSJC0
・Extension Flexible Cable Note1 (optional)   R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/36A, R8C/36C, R8C/36M Groups
MCU package System Configuration
64-pin 0.8mm-pitch LQFP
PLQP0064GA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53036ACFG40
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/34C, R8C/34M Groups
MCU package System Configuration

48-pin 0.5mm-pitch LQFP
PLQP0048KB-A

 

Click here for usage examples.

・E100
R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53034ACFK60
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/33G, R8C/33H Groups
MCU package System Configuration
32-pin 0.8mm-pitch LQFP
PLQP0032GB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53033GCFG90
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
R8C/32G, R8C/32H Groups
MCU package System Configuration
20-pin 0.65mm-pitch LSSOP
PLSP0020JB-A

Click here for usage examples.
・E100
R0E001000EMU00
・MCU Unit R0E521300MCU00
・Converter Board R0E53032GCSJC0
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[M16C Family  M16C/60 Series]

M16C/64 Group
MCU package System Configuration
100-pin 0.65mm-pitch QFP
PRQP0100JD-B

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit
R0E530640MCU00
・Converter Board R0E0100TNPFJ00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
100-pin 0.5mm-pitch LQFP
PLQP0100KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E530640MCU00
・Converter Board R0E0100TNPFK00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
M16C/64A, M16C/64C Note4, M16C/65, M16C/65C Note4 Groups
MCU package System Configuration
100-pin 0.65mm-pitch QFP
PRQP0100JD-B

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E530650MCU00
・Converter Board R0E0100TNPFJ00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
100-pin 0.5mm pitch LQFP
PLQP0100KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E530650MCU00
・Converter Board R0E0100TNPFK00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
M16C/65, M16C/65C Note4 Groups
MCU package System Configuration
128-pin 0.5mm-pitch LQFP
PLQP0128KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E530650MCU00
・Converter Board R0E530650CFK10
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.
  4. While some functions are not supported, they can be debugged using the E100 emulator for M16C/64A and M16C/65 Groups. Click here for inquiries regarding the function limitations.

 

[M16C Family  M16C/50 Series]

M16C/5M, M16C/57 Groups
MCU package System Configuration
100-pin 0.5mm-pitch LQFP
PLQP0100KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E535M00MCU00
・Converter Board R0E0100TNPFK00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
M16C/5L, M16C/56, M16C/5LD, M16C/56D, M16C/5M, M16C/57 Groups
MCU package System Configuration
80-pin 0.5mm-pitch LQFP
PLQP0080KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E535M00MCU00
・Converter Board R0E535M00CFK30
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
64-pin 0.5mm-pitch LQFP
PLQP0064KB-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E535M00MCU00
・Converter Board R0E535M00CFK40
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[H8SX Family  H8SX/1700 Seriea]

H8SX/1720 Groups
MCU package System Configuration

100-pin 0.5mm-pitch LQFP
PLQP0100KB-A

 

Click here for usage examples.

・E100
R0E001000EMU00
・MCU Unit R0E417250MCU00
・Converter Board R0E0100TNPFK00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[H8S Family  H8S/Tiny Series]

H8S/20203, H8S/20223, H8S/20215, H8S/20235 Groups
MCU package System Configuration
80-pin 0.65mm-pitch LQFP
PLQP0080JA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E420000MCU00
・Converter Board R0E420000CFJ30
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00
H8S/20103, H8S/20115 Groups
MCU package System Configuration
64-pin 0.5mm-pitch LQFP
PLQP0064KB-A

Click here for usage examples.

・E100

R0E001000EMU00
・MCU Unit R0E420000MCU00
・Converter Board R0E420000CFK40
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

64-pin 0.8mm-pitch LQFP
PLQP0064GA-A

 

Click here for usage examples.

・E100 R0E001000EMU00
・MCU Unit R0E420000MCU00
・Converter Board R0E420000CFG40
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional) R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[H8S Family  H8S/2400 Series]

H8S/2425 Group
MCU package System Configuration
120-pin 0.4mm-pitch
PLQP0120LA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E424270MCU00
・Converter Board R0E424270CFLE0
・Extension Flexible Cable Note1 (optional)
R0E001000FLX00
・External Trigger Cable Note2 (optional)
R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional)
R0E001000ACB00
120-pin 0.5mm-pitch
PLQP0120KA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E424270MCU00
・Converter Board R0E424270CFKE0
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional)
R0E001000ACB00
H8S/2427, H8S/2427R Groups
MCU package System Configuration
144-pin 0.5mm-pitch
PLQP0144KA-A

Click here for usage examples.
・E100 R0E001000EMU00
・MCU Unit R0E424270MCU00
・Converter Board R0E0144TNPFK00
・Extension Flexible Cable Note1 (optional) R0E001000FLX00
・External Trigger Cable Note2 (optional) R0E001000EXT00
・MCU Signal Measurement Board Note3 (optional)
R0E001000ACB00

Notes:

  1. Two sets of R0E001000FLX00 are necessary to expand I/F cables.
  2. It is necessary for external trigger event and for obtaining trace data of external signals.
  3. It is used to measure the signals of individual pins.

 

[R-Secure  RS-4 Series]

RS45C, RS44C, RS47X, RS46X, RS45X, RS44X
MCU package System Configuration
IC Card ・E100
R0E001000EMU00
・MCU Unit R0ESRS400MCU00

Below you will find information to support the development of your application.

 

Information supporting development tools

Title Description
My Renesas Create a My Renesas account to use our tool download services,
receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information,
questions and opinions with others who use Renesas MCU's.
Tool News Tool release information and other important information.
Operating Environment Information on system requirements and operating environment for the latest
version of tools.
Tool Environmental Information Information on RoHS compliance of tools.
Info on Discontinued Products A list of Renesas software and tools that have been discontinued and
are no longer being offered for new projects.

Confirm below disclaimers

Input Renesas account name and password

Menu
Contact