概要

Description

The SLG46867 provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins and the macrocells of the SLG46867. This highly versatile device allows a wide variety of mixedsignal functions to be designed within a very small, low power single integrated circuit.

特長

  • Dual P-FET Power Switch;
  • Read Back Protection (Read Lock);
  • Power Supply: 2.5 V (±8 %) to 5 V (±10 %);
  • Operating Temperature Range: -40°C to 85°C;
  • RoHS Compliant / Halogen-Free / Pb-Free;

Macrocells Overview

  • Two High Speed General Purpose Analog Comparators (ACMPxH);
  • Two Low Power General Purpose Analog Comparators (ACMPxL);
  • Two Voltage References (Vref):
    • Two Vref Outputs;
  • Fifteen Combination Function Macrocells:
    • Three Selectable DFF/Latch or 2-bit LUTs;
    • One Selectable Programmable Pattern Generator or 2-bit LUT;
    • Nine Selectable DFF/Latch or 3-bit LUTs;
    • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
    • One Selectable DFF/Latch or 4-bit LUTs;
  • Eight Multi-Function Macrocells:
    • Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
    • One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;
  • Serial Communications:
    • I2C Protocol Interface;
  • Programmable Delay with Edge Detector Output;
  • Deglitch Filter or Edge Detector;
  • Three Oscillators (OSC):
    • 2.048 kHz Oscillator;
    • 2.048 MHz Oscillator;
    • 25 MHz Oscillator;
  • Analog Temperature Sensor;
  • Power-On Reset (POR);

アプリケーション

アプリケーション

  • Power Sequencing with Complex Analog Control
  • Power Plane Component Size Reduction Project
  • Consumer Electronics
  • LED Driver
  • Haptic Motor Driver
  • System RESET with Power Switch

ドキュメント

タイトル 分類 日付
PDF6.38 MB
データシート
PDF881 KB
関連ファイル:
アプリケーションノート
PDF443 KB
関連ファイル:
アプリケーションノート
PDF3.02 MB
認証書
PDF433 KB
デバイスエラッタ

設計・開発

ソフトウェア/ツール

ソフトウェア/ツール

Go Configure™ Software HubGo Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices. Software Package ルネサス

ソフトウェアダウンロード

タイトル 分類 日付
ZIP6.80 MB
PCB設計ファイル

ボード&キット

ボード&キット

モデル