概要
説明
Radiation Hardened Low Dropout Adjustable Negative Voltage Regulator The radiation hardened ISL72991RH is a low dropout adjustable negative regulator with an output voltage range of -2.25V to -26V. The device features a 1A output current capability, an adjustable current limit pin (ILIM), and a shutdown pin (SD) for easy on/off control. The device incorporates unique circuitry that enables precision performance across the -55 °C to +125 °C temperature range and post-irradiation. Specifications across the full temperature range include an internal reference voltage of -1.25V +40mV/- 50mV (maximum), line regulation of ±25mV (maximum), and load regulation of ±15mV (maximum). The reference voltage is the ADJ to GND voltage. Constructed with the Intersil dielectrically isolated Rad Hard Silicon Gate (RSG) BiCMOS process, these devices are immune to single event latch-up and have been specifically designed to provide highly reliable performance in harsh radiation environments.
特長
- Electrically screened to DLA 5962-02503
- QML qualified per MIL-PRF-38535 requirements
- Latch-up immune DI process
- Wide input voltage range: -3V to -30V
- Nominal output voltage range: -2.25V to -26V
- Line regulation: ±25mV (maximum)
- Load regulation: ±12mV (typical); ±15mV (maximum)
- Dropout voltage (100mA): 0.2V (typical); 0.3V (maximum)
- Dropout voltage (1A): 1V (maximum)
- Minimum load current: 3.0mA
- 5V-12V TTL input-level shutdown (SD); low or floating = on; high = off
- Operating temperature range: -55 °C to +125 °C
- Radiation acceptance testing
- HDR (50-300rad(Si)/s): 300krad(Si)
- SEE hardness (see SEE report for details)
- SEL/SEB LETTH (VS = -30V): 86.4MeV•cm2/mg
製品比較
アプリケーション
設計・開発
ボード&キット
Radiation Hardened Low Dropout (LDO) Adjustable Negative Voltage Regulator Evaluation Board
The ISL72991RHEVAL2Z evaluation platform showcases the ISL72991RH, a radiation hardened, low dropout adjustable negative voltage regulator with an output voltage range of -2.25V to -26V. The device features a 1A output current capability, an adjustable current limit pin (ILIM) and a shutdown pin...
モデル
ECADモデル
SamacSysの回路図シンボル、PCBフットプリント、および3D CADモデルは、製品オプションテーブルのCADモデルリンクをクリックすることで参照できます。シンボルまたはモデルが対応していない場合は、SamacSysに直接リクエスト可能です。

製品選択
適用されたフィルター