Masaki Hama
Senior Staff Engineer

Renesas 32-bit proprietary core RX Microcontroller was launched a decade ago. And, thanks to great support from all the customers, we are now celebrating the RX 10th Year Anniversary. For more than 10 years, I have been involved in the field of microcontrollers (as a programmer in assembly) at Renesas Electronics. I wish I could be the same age as RX in Renesas.

Over the past decade, we have been offering a number of attractive solutions that meet customers’ needs. I would like to introduce 2 ready-to-use solutions on wireless connectivity for IoT Society, which are a cloud solution that enabled cloud connectivity for edge devices, and a Bluetooth 5 solution that allows inter-connectivity within these edge devices.

In the past, customers were mainly interested in microcontroller specification, how to initialize and set each peripheral module as well as how to use and program the microcontroller. However, in recent years, there has been a trend to offer ready and easy-to-use solutions that has eye-catching demonstration.

Cloud and Bluetooth 5 connectivity continue to expand its usage in offices, homes and production facilities. There will be more demand to obtain information wirelessly and save the data into cloud for convenience. To obtain the information wirelessly, users can consider using the Bluetooth 5, as its networks are built based on a Mesh topology that could connect to many devices and support wireless communications within 100 meters. By combining both the cloud and Bluetooth 5 solution, we can easily demonstrate an IoT system meeting the needs of the end use requirement of gathering data from edge devices to the cloud.

Firstly, let me introduce the cloud solution using an embedded microcontroller. The RX65N Cloud Kit makes it easy to evaluate the features used in IoT devices. It is a very popular kit, and we are increasing production to meet the demands.

Now, let’s try setting up this kit right away. It is very easy to setup and to make it more interesting, I would like to include an external sensor in the setup as shown in the picture.



The data sensed by the infrared sensor in the left picture is sent to the cloud, and the image on the right is then displayed in the web browser.

This is an example on creating temperature check solution during the current COVID-19 situation. The infrared sensor is connected to an unused pin on the RX65N Cloud Kit. The only necessary correction on the software was the serial control section of the infrared sensor. No changes on the program source code are required to the MQQT communication protocol portion. Once build and executed, the infrared sensor data was received by the RX65N and sent to the cloud via MQTT communication. The temperature distribution of the transmitted data from the sensor looks like the above image on the right. This is a simple modification with no changes necessary on the troublesome cloud connection. In future, human detection can also be realized using the infrared sensor based on Artificial Intelligence (A.I.)

Next, I will introduce a Bluetooth 5 Low Energy (LE) solution using RX23W.

Due to the availability of Bluetooth in smartphone, Bluetooth Low Energy has been widely used in numerous IoT devices.

RX23W is a 32-bit MCU supporting the full functionality of Bluetooth 5 LE. It has the capability of Bluetooth LE radio communications, system control, and security in a single chip, implemented with the wide variety of peripheral functions in common with the Renesas RX family.

Unfortunately, the above concept has not yet penetrated into the market. We have received a lot of inquiries about dedicated Bluetooth LE communication ICs. However, RX23W will become an over-specification for such usage. The RX23W is very suitable for cases where users want to add Bluetooth LE functions to the existing system or reduce the PCB real estate size by converting a 2 chips solution (System controller + Communication ICs) into a single chip solution.

Many developers may think that it is difficult to develop Bluetooth Low Energy. However, Renesas has prepared an environment to resolve this difficulty. Setup the RX23W Target Board (shown below) to start communicating with the smartphone.

RX23W Target Board


User only required to use the RX MCU development environment and no addition development is needed for the Bluetooth software driver portion. Configuration of the Bluetooth setting in the Smart Configurator can be set easily in the same way as other peripheral functions through the GUI setting. This allows the Bluetooth drivers and program code for the peripheral functions to be generated easily.

Now that the drivers are developed, we will build the application part of the Bluetooth. QE for BLE tool allows you to add and create profiles as easily as drivers, which is part of the defined Bluetooth communication protocol. There are two types of profiles: standard profiles that are pre-defined and custom profiles that you can create yourself. This is very useful because user do not need to develop from scratch. This time, I will define my own custom profile which create a notification to be sent to the smartphone when a switch is toggled on the target board.

You can download the Renesas smartphone app called GATT Browser from the Apple Store/Google Play in advance on the smartphone. When I toggle the switch on the board, the CPU will be notified of the interrupt signal by the assigned IRQ. Once the CPU receives the interrupt signal, it will send a notification to the smartphone via Bluetooth, and the GATT Browser on the smartphone displays the notification. I was able to confirm that Bluetooth 5 LE communication was established based on my development.

Bluetooth Application

The RX Wireless Connectivity solutions are here to lower the development hurdle for wireless communications. With the RX65N Cloud Kit and RX23W Target Board, you could shorten the development time by downloading the available tools from the website, and no longer need to develop the environment from scratch.

For more information, please refer to the RX Family Page.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Renesas Electronics Corporation is under license. Other trademarks and trade names are those of their respective owners.

Share this news on

Log in or register to post comments

Share this news on