概要

The ISL70001SEH, ISL70001SRH are radiation hardened and SEE hardened high efficiency monolithic synchronous buck regulators with integrated MOSFETs. This single-chip power solution operates over an input voltage range of 3V to 5.5V and provides a tightly regulated output voltage that is externally adjustable from 0.8V to ~85% of the input voltage. Output load current capacity is 6A for TJ < +145 °C. High integration and class-leading radiation tolerance make the ISL70001SEH, ISL70001SRH ideal choices to power many of today’s small form factor applications. Two devices can be synchronized to provide a complete power solution for large-scale digital ICs, like field-programmable gate arrays (FPGAs) that require separate core and I/O voltages. In applications where the ENABLE input is tied high to PVIN we recommend that the input voltage ramp rate be equal to or greater than 10V/ms. This is to prevent unwanted voltage from prematurely appearing on the output. For a PVIN voltage that has a slower ramp rate or is stepped up we recommend the use of the ISL70001ASEH. Ensuring that the ENABLE input is held low until the chosen VINPOR is satisfied will prevent this ‘false start’.

ISL70001SEH_ISL70001SRH Functional Diagram
ISL70001SEH_ISL70001SRH Functional Diagram
  • ±1% reference voltage over line, load, temperature and radiation
  • Current mode control for excellent dynamic response
  • Full Mil-temp range operation (TA = -55 °C to +125 °C)
  • High efficiency >90%
  • Fixed 1MHz operating frequency
  • Available in a thermally enhanced heatsink package - R48.B
  • Operates from 3V to 5.5V supply
  • Adjustable output voltage
  • Two external resistors set VOUT from 0.8V to ~85% of VIN
  • Bidirectional SYNC pin allows two devices to be synchronized 180° out-of-phase
  • Starts into prebiased load
  • Power-good output voltage monitor
  • Adjustable analog soft-start
  • Input undervoltage, output undervoltage and output overcurrent protection
  • Electrically screened to DLA SMD 5962-09225
  • QML qualified per MIL-PRF-38535 requirements
  • EH version is wafer-by-wafer acceptance tested for ELDRS
  • Radiation hardness
  • Total dose [50-300rad(Si)/s]: 100krad(Si) (min)
  • Total dose [<10mrad(Si)/s]: 50krad(Si) (min)
  • SEE hardness
  • SEL and SEB LETeff: 86.4MeV/mg/cm2 (min)
  • SEFI X-section (LETeff = 86.4MeV/mg/cm2) 1.4 x 10-6 cm2 (max)
  • SET LETeff (<1 pulse perturbation) 86.4MeV/mg/cm2 (min)

アプリケーション

  • FPGA, CPLD, DSP, CPU core or I/O voltages
  • Low-voltage, high-density distributed power systems

ドキュメント

設計・開発

ソフトウェアダウンロード
分類 タイトル 日時
ソフトウェア／ツール－ソフトウェア
iSim:PE Software v9.1
ログインしてダウンロード ZIP 145.10 MB
PCB設計ファイル
Artwork files for the VIRTEX5MEZPWREV1Z Evaluation Board
ZIP 328 KB
PCB設計ファイル
ISL70001SRHEVAL1Z Gerber Files
ZIP 265 KB
PCB設計ファイル
Schematics for the VIRTEX5MEZPWREV1Z Evaluation Board
PDF 98 KB
PCB設計ファイル
VIRTEX5MEZPWREV1Z Bill of Materials
XLS 38 KB
5 items

ボード＆キット

Rad Hard FPGA Power Solution Block Diagram

VIRTEX5MEZPWREV1Z

Reference
詳しくはこちら

Rad Hard Vitex 5 FPGA Power Solution Reference Design

Renesas offers a complete solution for powering radiation hardened FPGAs. Many space-grade FPGAs require a core voltage of 1.0V, which is supplied by the ISL70002SEH,...

主要ドキュメント:
VIRTEX5MEZPWREV1Z User Guide
ISL70001SRHEVAL1Z Rad Hard Buck Regulator Eval Board

ISL70001SRHEVAL1Z

Evaluation
詳しくはこちら

Rad Hard & SEE Hard 6A Synchronous Buck Regulator Evaluation Board

The ISL70001SRHEVAL1Z evaluation board is designed to demonstrate the features of the ISL70001SRH, a TID and SEE hardened 6A synchronous buck regulator IC with...

主要ドキュメント:
ISL70001SRHEVAL1Z User Guide
ISLKU060DEMO1Z Reference Board Front

ISLKU060DEMO1Z

Reference
詳しくはこちら

Renesas Rad Hard Power Management Reference Design for Xilinx's Space Grade XQRKU060

Over the last decade satellites and spacecrafts have seen an exponential increase in the need for on-board data processing and storage demands. Additionally, major...

主要ドキュメント:
ISLKU060DEMO1Z Reference Manual

ECADモデル

[製品選択]テーブル内の製品名をクリックするとSamacSysが提供する回路図シンボル、PCBフットプリント、3D CADモデルがご確認いただけます。 お探しのシンボルやモデルが見つからない場合、Webサイトから直接リクエストできます。

ECADモデルを調べる
Diagram of ECAD Models

製品選択

    Processing table
    Pkg. Type
    Carrier Type
    MOQ
    DLA SMD
    ご購入 / サンプル
    型名
    ISL70001SRHF/PROTO
    circleアクティブ
    memory
    view_in_ar
    		CQFP Tray 1
    ISL70001SRHQF
    circleアクティブ
    memory
    view_in_ar
    		CQFP Tray 25 5962R0922501QXC
    ISL70001SRHVF
    circleアクティブ
    memory
    view_in_ar
    		CQFP Tray 25 5962R0922501VXC
    ISL70001SRHVX
    circleアクティブ
    memory
    view_in_ar
    		10 5962R0922501V9A
    ISL70001SRHX/SAMPLE
    circleアクティブ
    memory
    view_in_ar
    		DIE 5
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product