概要
説明
The F2480 is a 400MHz to 3000MHz RF Analog Variable Gain Amplifier (AVGA) that can be used in receivers, transmitters, and other applications. Either the amplifier or Voltage Variable Attenuator (VVA) can be configured as the first stage in the cascade. The F2480 RF AVGA provides a 12dB typical maximum cascade gain (no attenuation) with a 4.3dB noise figure (amplifier as first stage) and a 36dB gain adjustment designed to operate with a single +5V supply. Nominally, the Zero-Distortion™ amplifier offers +41.5dBm output IP3 using 106mA of ICC. This device is packaged in a 5mm x 5mm, 32-TQFN with 50Ω single-ended RF input and RF output impedances for ease of integration into the signal-path lineup.
特長
- 400MHz to 3000MHz (amplifier range)
- 50MHz to 6000MHz (attenuator range)
- 12dB typical cascaded max gain
- 36dB continuous gain range
- Excellent linearity +41.5dBm OIP3
- Noise figure 4.3dB
- ICC = 106mA, 1.2mA amplifier standby current
- Bidirectional attenuator RF ports
- Positive amplifier gain slope vs. frequency to counteract system PCB loss
- VMODE pin allows either positive or negative attenuation control response
- Linear-in-dB attenuation characteristic
- 4 RF port pinout supporting multiple lineup configurations
- 50Ω input and output impedances
- Broadband, internally matched
- 5mm x 5mm, 32-TQFN package
製品比較
アプリケーション
ドキュメント
ピックアップ
ログイン後、ご登録が可能となります。
|
|
|
|
|---|---|---|
| 分類 | タイトル | 日時 |
| データシート | PDF 4.06 MB | |
| ガイド | PDF 2.24 MB | |
| ガイド | PDF 2.83 MB | |
| 概要 | PDF 1.15 MB | |
| 製品変更通知 | PDF 30 KB | |
| 製品概要 | PDF 382 KB | |
6件
|
||
設計・開発
ソフトウェア／ツール
ボード＆キット
Evaluation
F2480EVBI
アクティブ
Evaluation Kit for F2480 Broadband RF Analog VGA
The F2480EVBI is a fully populated evaluation board that allows the customer to easily evaluate the F2480 Analog VGA. Complete instructions for the EBV, pin descriptions and the schematic can be found in the product datasheet.
Recommended Documents:
モデル
ECADモデル
SamacSysの回路図シンボル、PCBフットプリント、および3D CADモデルは、製品オプションテーブルのCADモデルリンクをクリックすることで参照できます。シンボルまたはモデルが対応していない場合は、SamacSysに直接リクエスト可能です。
製品選択
適用されたフィルター
ビデオ&トレーニング
Constant Linearity (KLIN) RF Technology by IDT
IDT’s KLIN (constant linearity) RF technology extends both OIP3 and output 1 dB compression point (P1dBO) amplifier gain settings. This is particularly valuable in transmitter designs where the gain of the device is maintained within a normal gain setting window about 6 dB below maximum gain.
KLIN refers to Constant High Linearity Inner Amplifiers as the gain is adjusted. This technology extends the compression performance over a wide range of input powers, and also extends output third order intercept and corresponding inner modulation distortion performance over a wide range of output powers.
This technology is particularly advantageous in transmitter designs, where the gain of the device is maintained within a normal gain setting window.
This technology applies to some of IDT's high-gain, high-linearity transmitter variable gain amplifiers (VGAs). For more information, visit: http://www.idt.com/products/rf-products/variable-gain-amplifiers-vga.
Video List
