All-in one safety MCU for Low-end chassis system
The RH850/P1L-C microcontroller is suitable for low end chassis and safety systems and can support the ASIL D safety standard.
The P1L-C completes the MCU line up targeting the chassis and safety application space. First P1H-C and P1M-C were created targeting high and mid range chassis and safety systems and these achieved very high functional safety and security compliance; now P1L-C also achieves both high functional safety compliance and security for downsized chassis application with smaller feature set and small package such as 80 pin line up.
|CPU||120MHz (with Lockstep)|
|Program Flash||512KB||1 MB|
|Data Flash (EEPROM)||32 KB||64 KB|
|SRAM||RAM 64 KB + ERAM 8 KB||RAM 100 KB + ERAM 8 KB|
|DMA||8 (DMAC)/128 (DTS)|
|Timers||System Timer: 1 unit WDT: 1channel Generic Timer Module(GTM): Input 8 channels Output 6 channels||System Timer: 1 unit WDT: 1 channel Generic Timer Module(GTM): Input 16 channels Output 12 channels|
|Communication Interface||CAN: 2 channels, LIN/UART: 2 channels, CSI: 3 channels|
|Sensor Interface||SENT: 2 channels||SENT: 3 channels||SENT: 4 channels|
|12bit ADC||8 channels x 1 unit (Include 2ch T&H)||12 channels x 1 unit (Include 2ch T&H)||12 channels x 1 unit (Include 4ch T&H)||20 channels x 1 unit (Include 4ch T&H)|
|Operating Voltage||3.3 V or 5.0 V|
|Other peripherals||Error Control Module, Data CRC, Core voltage monitor, Temperature Sensor, Security functions (ICU-S)|
|Package||80-pin LQFP (10mm x 10mm 0.4mm pitch)||100-pin LQFP (12mm x 12mm 0.4mm pitch)||144-pin LQFP (16mm x 16mm 0.4mm pitch)|
For documentation for this product, such as technical updates, datasheets, and user's manuals, please contact your Renesas sales representative or office.
You can find an explanation of orderable part numbers here.
Resources for Software and Hardware
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2 studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.