Enables wired Ethernet project addsconnectivity on Synergy MCUs without an on-board Ethernet communication to the DK-S3A7 Development Kitcontroller and implements a web server application to demonstrate connectivity.
This project demonstrates the addition of wired Ethernet functionality to the DK-S3A7 development kit using the following:
- DM9051 SPI-to-Ethernet module
- Ethernet Add-On driver
- NetX™ framework in the Synergy Software Package (SSP)
The demo implements a simple web server application on the Synergy DK-S3A7 development kit using the DM9051 module, SSP, and the NetX™ network stack. It allows the user to toggle an LED on the DK-S3A7 kit from a web browser on the connected client PC to illustrate connectivity.
Copyright © 2017 DAVICOM. All Rights Reserved.
The content included herein has been provided by other companies and Renesas does not claim any ownership therein. Renesas may or may not moderate or pre-screen the content included herein. Renesas requires partners to verify the functionality of their products on Synergy Platform and Renesas is not responsible in any way for the content included herein nor its quality. Renesas does not endorse any content included herein or any opinion, recommendation, or advice expressed therein, and Renesas expressly disclaims any and all liability in connection with such content, whether or not arising under the laws of copyright, libel, privacy, obscenity, or otherwise. Renesas does not provide support for any of this content; all support requirements should be directed to the owner or licensor of the content. Renesas retains the right, at its sole discretion and without prior notice, to pre-screen, refuse, or remove any content from the Synergy Platform.
Current Public Release
Release Date: 2017-06-23
MCUs Supported: S3A7, S3A3, S3A6
Installation instructions are provided in the accompanying User Manual.