Interface & Connectivity

Overview

Description

The ISL8483E and ISL8485E are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive devices, this Renesas family is specified for 10% tolerance supplies (4. 5V to 5. 5V). The ISL8483E uses slew rate limited drivers that reduce EMI and minimize reflections from improperly terminated transmission lines or unterminated stubs in multidrop and multipoint applications. Data rates up to 10Mbps are achievable by using the ISL8485E, which features higher slew rates. Both devices present a “single unit load” to the RS-485 bus, which allows up to 32 transceivers on the network. Receiver (Rx) inputs feature a “fail-safe if open” design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short-circuit protected even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive. These half duplex configurations multiplex the Rx inputs and Tx outputs to allow transceivers with Rx and Tx disable functions in 8 Ld packages.

Features

  • Pb-Free (RoHS compliant)
  • Extended industrial temperature options (+125°C)
  • RS-485 I/O pin ESD protection: ±15kV HBM
  • Class 3 ESD level on all other pins: >7kV HBM
  • Specified for 10% tolerance supplies
  • High data rate version (ISL8485E): up to 10Mbps
  • Slew rate limited version for error free data transmission (ISL8483E): up to 250kbps
  • Single unit load allows up to 32 devices on the bus
  • 1nA low current Shutdown mode (ISL8483E)
  • Low quiescent current:
  • 160μA (ISL8483E)
  • 500μA (ISL8485E)
  • -7V to +12V common-mode input voltage range
  • Three-state Rx and Tx outputs
  • 30ns propagation delays, 5ns skew (ISL8485E)
  • Operate from a single +5V supply (10% tolerance)
  • Current limiting and thermal shutdown for driver overload protection

Applications

  • Factory Automation
  • Security Networks
  • Building Environmental Control Systems
  • Industrial/Process Control Networks
  • Level Translators (eg, RS-232 to RS-422)
  • RS-232 "Extension Cords"

Documentation

Title Type Date
PDF832 KB
Datasheet
PDF207 KB
Application Note
PDF352 KB
Application Note
PDF474 KB
Application Note
PDF366 KB
Application Note
PDF178 KB
Application Note
PDF513 KB
Application Note
PDF826 KB
Application Note
PDF443 KB
Application Note
PDF582 KB
Application Note
PDF440 KB
Application Note
PDF338 KB
Application Note
PDF365 KB
Application Note
PDF375 KB
Application Note
Brochure
PDF2.72 MB日本語
Brochure
PDF1.17 MB
End Of Life Notice
PDF156 KB
Other
PDF253 KB
Other
PDF254 KB
Other
PDF106 KB
Product Advisory
PDF266 KB
Product Change Notice
PDF398 KB
Product Change Notice
PDF223 KB
Product Change Notice
PDF86 KB
Product Change Notice
PDF108 KB
Product Change Notice
PDF438 KB
Report
PDF188 KB
Technical Brief
PDF300 KB
Technical Brief
PDF920 KB 简体中文
White Paper

Design & Development

Software & Tools

Software Downloads

Title Type Date
PDF1.17 MB
End Of Life Notice

Models

Models

Title Type Date
IBS47 KB
Model - IBIS

Support