CPX3 Evaluation Kit for AC and DC over 48V (J70D2 with RX631)
Jump to Page Section:
Back to top
Overview
Evaluation kit for software development and system evaluation compatible with PLC modem LSI R9A06G037. Since it has been designated as a special carrier type digital transmission device (technical conformity), it can be used as power line carrier communication equipment under Article 44, Paragraph 1 of the Radio Law Enforcement Regulations (Japanese Ministry of Internal Affairs and Communications designation AH-16008 No.: RTK0EE0003D02001BJ). 2 or more products are required to evaluate PLC communication. The microcomputer (RX631) has the firmware compatible with SimpleMAC (PHY evaluation tool), and the PLC modem LSI R9A06G037 is controlled from the PC using the SimpleMAC GUI.
CPX3評価キット J70D2 (RTK0EE0003D02002BJ)
- Compatible MCU, PLC Modem LSI
- MCU group: RX631
- MCU type on board: R5F5631EDDFP
- PLC modem LSI: R9A06G037
- On-board PLC modem LSI model name: R9A06G037
- PLC Communication
Design & Development
Boards & Kits
CPX3 Evaluation Kit for DC under 48V (J80D1 with RX651+Audio circuit)
The Renesas CPX3 Evaluation Kit J80D1 is a power line communication (PLC) evaluation kit for direct current (DC) power lines that can be used to carry out software development and system evaluation using the R9A06G037 PLC modem IC. This evaluation kit supports audio communication solutions. Two or more of this kit are necessary for evaluating PLC communication.
CPX3 Evaluation Kit for DC under 48V (J80D2 with RL78/G13)
This power line communication evaluation kit for direct current (DC) power lines can be used to carry out software development and system evaluation using the R9A06G037 PLC modem IC. Two or more of this kit are necessary for evaluating PLC communication.
Featured Documents:
Product Options