The HIP2103 and HIP2104 are half-bridge drivers designed for applications using DC motors, 3-phase brushless DC motors, or other similar loads. The two inputs (HI and LI) independently control the high-side driver (HO) and the low-side driver (LO). HI and LI can be configured to enable/disable the device, which lowers the number of connections to a microcontroller and the cost. The low IDD bias current in the Sleep Mode prevents battery drain when the device is not in use, which eliminates the need for an external switch to disconnect the driver from the battery. Integrated pull-down resistors on all of the inputs (LI, HI, VDen, and VCen) reduce the need for external resistors. An active low resistance pull-down on the LO output ensures that the low-side bridge FET remains off during the Sleep Mode or when VDD is below the Undervoltage Lockout (UVLO) threshold. The HIP2104 has a 12V linear regulator and a 3. 3V linear regulator with separate enable pins. The 12V regulator provides internal bias for VDD and the 3. 3V regulator provides bias for an external microcontroller (and/or other low voltage ICs), which eliminates the need for discrete LDOs or DC/DC converters.


  • 60V maximum bootstrap supply voltage
  • 3.3V and 12V LDOs with dedicated enable pins (HIP2104)
  • 5µA sleep mode quiescent current
  • VDD undervoltage lockout
  • 3.3V or 5V CMOS compatible inputs with hysteresis
  • Integrated bootstrap FET (replaces traditional boot strap diode)
  • HIP2103 is available in a 3x3mm, 8 Ld TDFN package
  • HIP2104 is available in a 4x4mm, 12 Ld DFN package
  • Pb-Free (RoHS Compliant)


  • Half bridge, full bridge and BLDC motor drives
  • UPS and inverters
  • Class-D amplifiers
  • Any switch mode power circuit requiring a half bridge driver


発注型名 Part Status Type Carrier Type 購入/サンプル
Active Tube
Active Reel
Active Reel


タイトル 他の言語 分類 形式 サイズ 日付
HIP2103, HIP2104 Datasheet データシート PDF 430 KB
HIP2013-4DEMO2Z User Guide マニュアル PDF 935 KB
HIP2103_4MBEVAL1Z User Guide マニュアル PDF 1.55 MB
HIP2103-4DEMO1Z User Guide マニュアル PDF 1.91 MB
Five Easy Steps to Create a Multi-Load Power Solution ホワイトペーパー PDF 846 KB
How Green is Your Cloud? ホワイトペーパー PDF 295 KB
Integrating BLDC Motors with Li-ion Batteries in Motor Drive Applications 简体中文 ホワイトペーパー PDF 189 KB
AN1681: Grounding Techniques アプリケーションノート PDF 509 KB
AN1684: Nonideality of Ground アプリケーションノート PDF 397 KB
AN1116: CMOS Applications Information アプリケーションノート PDF 576 KB
PCN19023 - Datasheet specification change for listed Renesas HIP210x* Products 製品変更通知 PDF 258 KB
HIP2104DBEVAL1Z Design Files 設計ファイル ZIP 358 KB
HIP2103-4DEMO2Z Design Files 設計ファイル ZIP 588 KB
HIP2103-4DEMO1Z Design Files 設計ファイル ZIP 1.12 MB
HIP2103_4MBEVAL1Z Design Files 設計ファイル ZIP 1.38 MB


製品名 タイトル 分類 会社名
HIP2103_4MBEVAL1Z 60V, 1A/2A Peak, 1/2 Bridge Driver with 4V UVLO Evaluation Kit 評価
HIP2103-4DEMO1Z 60V, 1A/2A Peak, 1/2 Bridge Driver with 4V UVLO Demonstration Board デモ
HIP2103-4DEMO2Z 3-Phase 1/2 Bridge Driver Demonstration Board デモ