PG-FP5 (Discontinued product)

infoAdditional Details

Control panel suitable for the stand-alone operation

Image

Easy-to-Use Graphical User Interface (GUI)

Image

Major Functions

• Downloading and uploading program files and parameter files
• Editing program files (by using HEX editor)
• Checksum calculation
• Saving the action logs
• Manager function (Prohibition of uploading program files and changing the password and settings, etc.)
• Feasibility of blank checking, erasing, programming, verifying, reading, settings and obtainment of Flash options information, checksum and programming after erasing
• Execution of self-testing function
• Writing in the minimum unit of the flash memory is available for the following devices
  • RX family
  • RH850 family (excluding the RH850/P1x-C group)
  • V850 family (V850E2/Fx4-L, V850/FF4-G, V850E2/FG4-G, V850E2/Px4-L, or V850PG4-S only)

Components

• PG-FP5
• USB cable
• Serial cable
• Target cables of two sorts (14-pin and 16-pin types)
• GND cable
• Setup manual

Note: Except for Europe, the power supply adapter, QB-COMMON-PW-xx, is not bundled in the product package of PG-FP5. Please purchase it separately.

System Configuration

Image

PG-FP5 How to Find the Version Number

Programming GUI, Firmware and FPGA for PG-FP5

To check the version number, follow these steps:

Step1. PG-FP5 Startup

After the cables are connected, press the POWER button on the PG-FP5.

Step2. Startup of Programming GUI

Click the Start menu, "All Programs", point to "Renesas Electronics Utilities", "Programming Tools", and then select "PG-FP5 Vx.xx" of "PG-FP5 Vx.xx" to start the Programming GUI. When communication is established and the programming GUI is correctly started, the main window will be opened.

Step3. Check the Version Numbers of the Programming GUI, Firmware and FPGA with "Reset Command" or "Main Window", as Shown Below:

• Programming GUI
  • - Open the Help menu and click the About FP5 command.
    The version number of Programming GUI is displayed in the About FP5 dialog box.
    or
    - Refer to the programming parameter window on the right of the main window. The version number of Programming GUI is shown at the FP5_GUI row in the Programmer box of the programming parameter window.

• Firmware
  • - Open the Programmer menu and click the Reset command.
    The version number of Firmware is displayed in the action log window.
    or
    Refer to the programming parameter window on the right of the main window. The version number of Firmware is shown at the Firmware row in the Programmer box of the programming parameter window.

• FPGA
  • - Open the Programmer menu and click the Reset command. The version number of FPGA is displayed in the action log window.

Image

Display Example of Reset Command
 

Image

Display Example of Main Window