概要

Description

The R2A20112A controls a boost converter to provide an active power factor correction. The R2A20112A adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleaving function improves ripple current on input or output capacitor by 180 degrees phase shift. Soft-star, the feedback loop short detection, two mode over-voltage-protection, over-current-protection, Over current ON/OFF timer protection for boost Diode short and slave ZCD open detection are built in the R2A20112A, and can constitute a power supply system of high reliability with few external parts.

特長

  • Absolute Maximum Ratings Supply voltage Vcc: 24 V Junction temperature Tj: –40 to +150°C
  • Electrical Characteristics VREF output voltage Vref: 5.0 V ± 1.5% UVLO operation start voltage Vuvlh: 10.5 V ± 0.7 V UVLO operation shutdown voltage Vuvll: 9.3 V ± 0.5 V UVLO hysteresis voltage Hysuvl: 1.2 V ± 0.5 V
  • Functions Boost converter control with critical conduction mode Interleaving control Soft start function for the reference voltage of Error Amp Two mode PFC output Over-voltage-protection Mode1: Dynamic OVP corresponding to a voltage rise by dynamic load change. Mode2: Static OVP corresponding to over-voltage in stable. PFC output Dynamic-under-voltage-protection (DUVP) Feedback loop open/short detection Master and Slave independence over-current-protection 280 μs restart timer Slave ZCD signal open detection Over current ON/OFF timer protection for boost Diode short
  • Package Pb-free SOP-16

アプリケーション

ドキュメント

タイトル 分類 日付
PDF87 KBEnglish
データシート
PDF227 KB
アプリケーションノート
PDF1.21 MB
アプリケーションノート
PDF1.30 MB
アプリケーションノート
PDF224 KB
アプリケーションノート
PDF1.10 MBEnglish
アプリケーションノート
PDF509 KB
アプリケーションノート
PDF397 KB
アプリケーションノート
PDF4.87 MBEnglish
製品変更通知
PDF3.82 MBEnglish
製品変更通知
PDF1.91 MBEnglish
製品変更通知
PDF331 KBEnglish
テクニカルアップデート
PDF173 KBEnglish
テクニカルアップデート
PDF110 KB
テクニカルアップデート
PDF96 KB
テクニカルアップデート

設計・開発

モデル