±15kV ESD Protected, +125°C, 40Mbps, 5V, PROFIBUS®, Full Fail-safe, RS-485/RS-422 Transceivers
ページセクションへ移動：
Back to top
ECADモデルを調べる
概要
Description
The ISL3159E is a ±15kV IEC61000 ESD protected, 5V powered, single transceiver that meets both the RS-485 and RS-422 standards for balanced communication. It also features the larger output voltage and higher data rate (up to 40Mbps) required by high speed PROFIBUS applications, and is offered in industrial and extended Industrial (-40°C to +125°C) temperature ranges. The low bus currents (+220µA/-150µA) present a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s load limit and without using repeaters. This transceiver requires a 5V ±10% tolerance supply, and delivers at least a 2. 1V differential output voltage over this supply range. This translates into better noise immunity (data integrity), longer reach, or the ability to drive up to six 120Ω terminations in “star” or other nonstandard bus topologies, at the exceptional 40Mbps data rate. SCSI applications benefit from the ISL3159’s low receiver and transmitter part-to-part skews. The ISL3159 is perfect for high speed parallel applications requiring simultaneous capture of large numbers of bits. The low bit-to-bit skew eases the timing constraints on the data latching signal. Receiver (Rx) inputs feature a “full fail-safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or terminated but undriven. Rx outputs feature high drive levels (typically >30mA at VOL = 1V) to ease the design of optically isolated interfaces. Hot plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes. Driver (Tx) outputs are short-circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.
特長
- IEC61000 ESD protection on RS-485 I/O Pins: ±15kV
- Class 3 HBM ESD level on all other pins: >9kV
- Large differential VOUT: 2.8V into 54Ω Better noise immunity, or drive up to 6 terminations
- High data rates: up to 40Mbps
- Specified for +125°C operation
- 11/13ns (max) Tx/Rx propagation delays; 1.5ns (maximum) skew
- 1/5 unit load allows up to 160 devices on the bus
- Full fail-safe (open, shorted, terminated/undriven) receiver
- High Rx IOL to drive optocouplers for isolated applications
- Hot plug - Tx and Rx outputs remain three-state during power-up
- Low quiescent supply current: 4mA
- Low current shutdown mode: 1µA
- -7V to +12V common-mode input voltage range
- Three-state Rx and Tx outputs
- Operates from a single +5V supply (10% tolerance)
- Current limiting and thermal shutdown for driver overload protection
- Pb-free (RoHS compliant)
アプリケーション
アプリケーション
- PROFIBUS® DP and FMS Networks
- SCSI "Fast 40" Drivers and Receivers
- Motor Controller/Position Encoder Systems
- Factory Automation
- Field Bus Networks
- Security Networks
- Building Environmental Control Systems
- Industrial/Process Control Networks
ドキュメント
| タイトル | 分類 | 日付 | |
|---|---|---|---|
PDF1.12 MB
|
データシート
|
||
PDF1023 KB
|
アプリケーションノート
|
||
PDF207 KB
|
アプリケーションノート
|
||
PDF474 KB
|
アプリケーションノート
|
||
PDF178 KB
|
アプリケーションノート
|
||
PDF513 KB
|
アプリケーションノート
|
||
PDF826 KB
|
アプリケーションノート
|
||
PDF443 KB
|
アプリケーションノート
|
||
PDF582 KB
|
アプリケーションノート
|
||
PDF440 KB
|
アプリケーションノート
|
||
PDF338 KB
|
アプリケーションノート
|
||
PDF365 KB
|
アプリケーションノート
|
||
PDF375 KB
|
アプリケーションノート
|
||
PDF559 KB
|
アプリケーションノート
|
||
カタログ
|
|||
カタログ
|
|||
PDF156 KB
|
その他
|
||
PDF253 KB
|
その他
|
||
PDF254 KB
|
その他
|
||
PDF208 KB
|
Price Increase Notice
|
||
PDF106 KB
|
Product Advisory
|
||
PDF363 KB
|
Product Advisory
|
||
PDF178 KB
|
製品変更通知
|
||
PDF326 KB
|
製品変更通知
|
||
PDF266 KB
|
製品変更通知
|
||
PDF398 KB
|
製品変更通知
|
||
PDF108 KB
|
製品変更通知
|
||
PDF248 KB
|
製品変更通知
|
||
PDF300 KB
|
技術概要
|
||
PDF920 KB
|
ホワイトペーパー
|
||
PDF246 KB
|
ホワイトペーパー
|
||
PDF624 KB
|
ホワイトペーパー
|
設計・開発
モデル
ECADモデル
[製品選択]テーブル内の製品名をクリックするとSamacSysが提供する回路図シンボル、PCBフットプリント、3D CADモデルがご確認いただけます。 お探しのシンボルやモデルが見つからない場合、Webサイトから直接リクエストできます。
製品選択
Processing table
型名 |
Pkg. Type |
Carrier Type |
MOQ |
ご購入 / サンプル |
|---|---|---|---|---|
| SOICN | Tube | 1960 | サンプルを入手, | |
| SOICN | Reel | 2500 | ||
| SOICN | Reel | 250 | ||
| DFN | Tube | 2000 | サンプルを入手, | |
| DFN | Reel | 6000 | ||
| DFN | Reel | 250 | ||
| MSOP | Tube | 1960 | サンプルを入手, | |
| MSOP | Reel | 2500 | ||
| MSOP | Reel | 250 | ||
| SOICN | Tube | 1960 | サンプルを入手, | |
| SOICN | Reel | 2500 | ||
| DFN | Tube | 2000 | サンプルを入手, | |
| DFN | Reel | 6000 | ||
| MSOP | Tube | 1960 | サンプルを入手, | |
| MSOP | Reel | 2500 | ||
| MSOP | Reel | 250 |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product