Cost optimized high performance RX microcontroller with enhanced touch key function and 5V operation support.


The RX130 Group integrates a built-in max. 36-channel capacitive touch sensor. The capacitive touch sensor uses an improved detection method compared to previous products and so has vastly improved noise immunity, sensitivity and water resistance. As a result, malfunctions have been reduced, and touch keys are now be able to be applied to a variety of materials like e.g. wood, other than the typical acrylic or glass: The RX130 Touch feature is an ideal fit to consumer electronics products that are used in wet environments such as in the kitchen or bath. The RX130 Group has a lot of built-in functional safety hardware, and can easily support the IEC/UL60730 safety standard for consumer electronics. The RX130 operates at a maximum voltage of up to 5.5 V. So it is suitable for applications such as home appliances (washing machine, IH cooking heater) with touch panel function.


Key Features:

(xy: Code for ROM size and chip version, z: Code for operating temperature)

Pin Count 48-pin  64-pin  80-pin  100-pin
Part Name R5F5130xyzFL R5F5130xyzFM R5F5130xyzFK R5F5130xyzFN R5F5130xyzFP
Program Flash 64 to 512 KB (xy=3A : 64 KB, xy=5A : 128 KB, xy=6B : 256 KB, xy=7A : 384 KB, xy=8A : 512 KB) 128 to 512 KB
 (xy=5B : 128 KB, xy=6B : 256 KB, xy=7A : 384 KB, xy=8A : 512 KB )
Data Flash 8 KB
SRAM 10 to 48 KB (x=3 : 10 KB, x=5 : 16 KB, x=6 : 32 KB, x=7 : 48 KB, x=8 : 48 KB) 16 to 48 KB
 (x=5 : 16 KB, x=6 : 32 KB, x=7 : 48 KB, x=8 : 48 KB)
Operating Frequency 32 MHz
Operating Voltage 1.8 to 5.5 V
Capacitive Touch Interface Unit 24 channels 32 channels 36 channels
Timers 8-bit timer 4 channels
16-bit compare match timer 2 channels
16-bit Multi-function timer unit 6 channels
Communication Interfaces Serial Communication Interface (SCI) 4 channels 7 channels
IIC Bus Interface (RIIC) 1channel
Serial Peripheral Interface (RSPI) 1channel
Remote control signal receiver (REMC)
- 2 channels
Analog function 12-bit A/D Converter 10 channels 14 channels 17 channels 24 channels
8-bit D/A Converter - 2 channels
Temperature Sensor 1 channel
Comparator 2 channels
Safety Function Independent Watchdog Timer, CRC, A/D diagnostic, Data operation Circuit etc.
Operating Temperature -40 to 85 ℃ (z=D) / -40 to 105 ℃ (z=G)
Packages LFQFP (7 x 7 mm, 0.5 mm pitch) LQFP (14 x 14 mm, 0.8 mm pitch)
LFQFP (10 x 10 mm, 0.5 mm pitch)
LFQFP (12 x 12 mm, 0.5 mm pitch)  LFQFP (14 x 14 mm, 0.5 mm pitch)

Pin Count / Memory Size Lineup:

Program Flash



Block Diagram:

您可以在此处找到 可订购器件号的说明


标题 描述
My Renesas 创建一个My Renesas帐户以使用我们的工具下载服务,接收电子通讯/更新通知,并利用我们的其他服务。
电子学习 用于学习有关微控制器和微处理器的信息。
常见问题 常见问题和有用的发展提示。
论坛 论坛和社区站点,可与使用瑞萨产品的其他人共享技术信息,问题和意见。



标题 描述
e² studio 基于CDT插件的集成环境 (IDE),支持全球流行的开源集成开发环境“Eclipse”和C/C++语言开发。
CS+ 该集成开发环境(IDE)可用于编码,组装,编译和仿真。CS + 还包括入门套件。
E2 仿真器精简版 该入门级的片上调试仿真器以较低的价格提供与E1仿真器相同的功能。
E2 仿真器 该片上调试仿真器具有先进的功能,可提高开发效率。 除了从调试到闪存编程的基本功能外,还支持热插件和外部触发器作为标准项目。 该仿真器还可以通过高速下载(与E1仿真器相比)来缩短开发时间,并且可以与各种解决方案(例如,对正在开发的系统消耗的电流进行调整)结合使用。
E20 仿真器 当与RX600和RX700 MCU结合使用时,该片上调试仿真器具有增强的调试功能,例如大容量跟踪和实时RAM监视(此仿真器提供的调试功能与其他MCU的E1仿真器相同)。
E1 仿真器 该片上调试仿真器是提供基本调试功能的标准模型(于2019年12月下旬停产)。


Hardware Design Support

Title Description
Resonator Information Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.

For Main clock resonator :
KYOCERA: Click here for RX130 oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F5130 into the IC Part Number search box.

For Sub clock resonator :
KYOCERA: Click here for RX130 oscillation evaluation result.

Action Needed


The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.