The RX24U Group features a 32-bit microcontroller ideally suited for dual inverter control with a built-in Floating-Point Unit (FPU) that enables it to easily execute complex inverter control algorithms. The built-in Differential Programmable Gain Amplifier and the provide safety system allow to bring application system cost down.
Products with the operating ambient temperature of 105 °C are also available.
The easy usability of the RX24U is helping our customers to reduce the time to market by reducing software development efforts and system design by providing a ready-to-go motor control solution, including software and hardware design examples.
(x : Code for flash memory size)
|R5F524UxADFP, R5F524UxAGFP||R5F524UxADFB, R5F524UxAGFB|
|Max. Frequency||80 MHz|
|Memory||Program Flash||256 KB (x=B) / 384 KB (x=C) / 512 KB (x=E)|
|Data Flash||8 KB|
|Clock||Main Clock||Max. 80 MHz (External clock 1 to 20 MHz)|
|High Speed On-chip Oscillator||32MHz / 64MHz|
|Low Speed On-chip Oscillator||4 MHz|
|PLL||Input frequency : 4 to 12.5 MHz (Selectable from x 4 to x 15.5)|
|On-Chip Oscillator for IWDT||15 kHz|
|DMA||Data Transfer Controller (DTCa)||Supported|
|I/O Port||Input / Output||79||110|
|Open Drain Output||61||90|
|5 V Tolerant||2||2|
|Timers||16-bit Multi-function Timer Pulse Unit 3 (MTU3d)||9 channels|
|16-bit General Purpose PWM Timer (GPTB)||4 channels|
|Port Output Enable 3||POE0#, POE4#, POE8#, POE10#, POE11#, POE12#|
|8-bit Timers (TMR)||2 channels x 4 units|
|16-bit Compare Match Timer (CMT)||2 channels x 2 units|
|Independent Watchdog Timers||14-bit x 1 channel|
|Communication Interface||Serial Communication Interface (SCIg)||4 channels||6 channels|
|I2C Bus Interface (RIICa)||1 channel|
|Serial Peripheral Interface (RSPIb)||1 channel|
|CAN Interface (RSCAN)||1 channel|
|Analog||12-bit A/D Converter||5 channels x 2 units (Of the high precision 4 channels x 2 units) High precision 10 channels x 1unit||5 channels x 2 units (Of the high precision 4 channels x 2 units) High precision 12 channels x 1unit|
|3 channels simultaneous sampling function||1unit|
|Differential Programmable Gain Amplifier||4 channels (1 channel for 1 shunt control + 3 channels for 3 shunt control)|
|Comparators (Comparator C)||4 channels|
|D/A Converter||8-bit x 2 channels|
|Safety Functions||Memory Protection, Register Write Protection, CRC, Main clock oscillation stop detection, Clock frequency accuracy circuit, Data operation circuit etc.|
|Supply Voltage||2.7 to 5.5 V @ 80 MHz|
|Operating Ambient Temperature||
-40 to 85 ℃ (R5F524UxADyy)
-40 to 105 ℃ (R5F524UxAGyy)
(Note) x=Code for flash memory size, yy=Code for package, pin-count and pin-pitch
|Package||LFQFP 14 x 14 mm, 0.5 mm pitch||LFQFP 20 x 20 mm, 0.5 mm pitch|
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2 studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
|Renesas Solution Starter Kits||The "24V Motor Control Evaluation System for RX23T" offered by Renesas makes it easy for users to evaluate motor solutions.
|CPU Card||The CPU Card is used with 24V Motor Control Evaluation System for RX23T.|
Hardware Design Support
|Resonator Information||Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.
For Main clock resonator :
KYOCERA: Click here for RX24U oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F524U into the IC Part Number search box.
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.