Microcontroller incorporating a floating point unit (FPU), best suited for controlling a single inverter

 

The RX23T Group is 32-bit microcontroller and suited for single inverter control and has a built-in FPU (floating-point processing unit) that enables it to easily program complex inverter control algorithms. This helps to greatly reduce the man-hours required for software development and maintenance. Furthermore, thanks to the RX200 core the current consumed in software standby mode (with RAM retention) is a mere 0.45 μA. RX23T microcontrollers operate in a broad voltage range from 2.7 V to 5.5 V, which is useful for inverter control, and are highly compatible with the RX62T Group at the pin arrangement and software level.

 

Key Features:

ITEM RX23T  
CPU core RX CPU v2 core
  • General registers: 32-bit x 16
  • Multiplier: 32-bit multiplier
  • Divider: Yes
  • Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
Maximum operating frequency 40MHz
Power supply voltage 2.7 to 5.5V
Floating-point operation unit Single-precision floating-point operation unit
(supports addition/subtraction/comparison/multiplication/division/other instructions)
Proguram Flash Max.128 KB
SRAM 12KB
On-chip peripheral functions Transfer
  • Data transfer controller (DTCa)
Timers
  • Multi-function timer pulse unit 3: 16-bit x 6 channels (MTU3c)
  • Port output enable 3 (POE3b)
  • 8-bit timer (TMR): 8-bit x 2 channels x 2 units
  • Compare match timer (CMT): 16-bit x 2 channels x 2 units
Communications
  • Serial communications interface (SCIg): 2 channels
  • I2C bus interface (RIICa): 1 channel
  • Serial peripheral interface (RSPIa): 1 channel
Analog
  • 12-bit A/D converter (S12ADE): 10 channels
  • Comparator C (CMPC): 3 channels
  • D/A converter for generating reference voltage for comparator C (DA)
Safety
  • Clock frequency accuracy measurement circuit (CAC)
  • Data operation circuit (DOC)
  • 14-bit independent watchdog timer (IWDTa)
  • A/D converter self-diagnostic function / open-circuit detection function
  • CRC calculator (CRC)
  • Register write protection
Clock generation circuit
  • Main clock oscillator
  • High-speed on-chip oscillator
  • Low-speed on-chip oscillator (LOCO)
  • PLL frequency synthesizer
  • Dedicated on-chip oscillator for the IWDT
Other
  • Multi-function pin controller (MPC)
  • Power-on reset circuit (POR)
  • Voltage detection circuit (LVDAb)
On-chip debugger interface Yes
Low power consumption modes 3 modes
  • Sleep mode
  • Deep sleep mode
  • Software standby mode
Packages PLQP0048KB-B(48-pin,LFQFP,7x7mm,0.5mm pitch)
PLQP0052JA-B(52-pin,LQFP,10x10mm,0.65mm pitch)
PLQP0064KB-C(64-pin,LFQFP,10x10mm,0.5mm pitch)

Pin Count / Memory Size Lineup:

Program Flash
SRAM

128KB
12KB
64KB
12KB
Pins
Package
48
LFQFP
52
LQFP
64
LQFP

 

Block Diagram:

RX23T Block Diagram

您可以在此处找到 可订购器件号的说明

软件和硬件支持信息

标题 描述
My Renesas 创建一个My Renesas帐户以使用我们的工具下载服务,接收电子通讯/更新通知,并利用我们的其他服务。
电子学习 用于学习有关微控制器和微处理器的信息。
常见问题 常见问题和有用的发展提示。
论坛 论坛和社区站点,可与使用瑞萨产品的其他人共享技术信息,问题和意见。

 

软件设计支持

标题 描述
e² studio 基于CDT插件的集成环境 (IDE),支持全球流行的开源集成开发环境“Eclipse”和C/C++语言开发。
CS+ 该集成开发环境(IDE)可用于编码,组装,编译和仿真。CS + 还包括入门套件。
E2 仿真器精简版 该入门级的片上调试仿真器以较低的价格提供与E1仿真器相同的功能。
E2 仿真器 该片上调试仿真器具有先进的功能,可提高开发效率。 除了从调试到闪存编程的基本功能外,还支持热插件和外部触发器作为标准项目。 该仿真器还可以通过高速下载(与E1仿真器相比)来缩短开发时间,并且可以与各种解决方案(例如,对正在开发的系统消耗的电流进行调整)结合使用。
E20 仿真器 当与RX600和RX700 MCU结合使用时,该片上调试仿真器具有增强的调试功能,例如大容量跟踪和实时RAM监视(此仿真器提供的调试功能与其他MCU的E1仿真器相同)。
E1 仿真器 该片上调试仿真器是提供基本调试功能的标准模型(于2019年12月下旬停产)。

 

Hardware Design Support

Title Description
IBIS/BSDL IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.
BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
Resonator Information Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.

For Main clock resonator :
KYOCERA: Click here for RX23T oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F523T into the IC Part Number search box.
您可以使用下方的筛选器来筛选样例程序和应用手册。

Action Needed

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.