概览

简介

RL78/G16微控制器是一款通用微控制器,搭载工作频率为16MHz的电容式触摸通道。我们提供丰富的产品线,包括10引脚产品在内,在触摸微控制器中,这是瑞萨电子最小的引脚封装。此外,它还配备了功能安全的硬件,有助于用户通过家用电器安全标准IEC/UL60730认证。此外,由于它内置高精度(±1.0%)的高速片上振荡器、数据闪存、丰富的串行接口和比较器,适合要求节省空间的应用场合。评估板(Fast Prototyping Board)只需连接USB线即可编写和调试程序、智能配置器(Smart Configurator)可通过GUI简化设计、电容式触摸评估系统可缩短触摸界面开发周期(评估板、电容式触摸传感器开发支持工具QE for Capacitive Touch) 、以及Arduino库等,这些为RL78/G16提供了丰富的开发环境。它与现有的RL78系列兼容,可无缝切换,适用于从家电、消费类电子产品到工业设备的广泛用途。

特性

  • CPU:RL78 内核,最高 16MHz
  • 电压:2.4V 到 5.5V
  • 封装:10 引脚至 32 引脚
  • 程序闪存:16KB/32KB
  • SRAM: 2KB
  • 数据闪存: 1KB
  • 工作温度:不超过 125°C
  • 增强型电容式感应单元(CTSUb)
  • 定时器:8 路 16 位定时器,1 路看门狗定时器,1 路 12 位间隔定时器,1 路实时时钟
  • PWM:7 路 PWM 输出
  • 模拟功能:11 路 8/10 位 A/D 转换器
  • 片上振荡器 频率(MHz):高速:最高 16 MHz,低速:15kHz
  • 安全:A/D 测试,CRC 计算器,RAM 奇偶校验错误检测,频率检测,无效存储器访问检测
  • 其他:可选通电重置,低电压检测,片上调试 2.4V 到 5.5V(单线、双线)
  • 封装:SSOP、LQFP、QFN

产品对比

应用

文档

设计和开发

软件与工具

软件与工具

Software title
Software type
公司
RI78V4 V2 Real-time OS for RL78 Family
μITRON Specification real-time OS for RL78 Family [Required IDE : CS+]
ITRON OS 瑞萨电子
RL78 Web Simulator
Right online tools to support initial evaluation of the low power consumption RL78 Family. Lineup: MCU Simulator Online and Current Consumption Calculator. Free of charge.
Simulator 瑞萨电子
Simulator for e² studio of RL78 Family
Simulator for RL78 Family [Support IDE: e² studio] (Note: This product is included in the Renesas IDE "e² studio" and is not available separately.)
Simulator 瑞萨电子
CS+
Renesas integrated development environment (IDE) [Support MCU/MPU: RH850, V850, RX, RL78, 78K0R, 78K0] (Note: CS+ is not generally promoted to U.S. and European customers.) (Note: To use Smart Configurator on CS+ for RL78/G23 and RX family MCUs, install the Smart Configurator for each MCU family separately downloading from ”Design & Support” > ”Development Tools” > ”Smart Configurator”)
IDE and Coding Tool 瑞萨电子
CS+ Partner OS Aware Debugging Plug-in
Features for task level debugging of real-time OS applications [Plugin for Renesas IDE CS+] [Support MCU/MPU: RX, RL78]
Plug-in, OS Aware Debugging, Etc. 瑞萨电子
e² studio - information for RL78 Family
Eclipse-based Renesas integrated development environment (IDE).
IDE and Coding Tool 瑞萨电子
E2 emulator [RTE0T00020KCE00000R]
On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RH850, R-Car D1, RL78, RX, RISC-V MCU]
Emulator 瑞萨电子
E2 emulator Lite [RTE0T0002LKCE00000R]
On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RL78, RX, RISC-V MCU]
Emulator 瑞萨电子
Renesas Flash Programmer (Programming GUI)
Flash memory programming software [Support MCU/MPU and devices: RA, RE, RX, RL78, RH850, RISC-V MCU Renesas Synergy, DA1459x, DA1469x, DA1470x, Power Management, Renesas USB Power Delivery Family, ICs for Motor Driver/Actuator Driver, V850, 78K0R, 78K0]
Programmer (Unit/SW) 瑞萨电子
RL78 Smart Configurator
RL78 Smart Configurator is a utility for combining software in ways that meet your needs. It simplifies the embedding of Renesas drivers in your systems through supports for importing middleware and drivers and configuring pins.
Solution Toolkit 瑞萨电子
QE for Current Consumption: A Dedicated Tool for Current Measurement
Development assistance tool helps to shorten the times taken in operations for the tuning of currents drawn. [Standard item in the "e² studio" and CS+ (CS+ for CC only) IDEs] [Support MCU/MPU: RX, RL78]
Solution Toolkit 瑞萨电子
Code Flash Libraries (Flash Self Programming Libraries)
Libraries for the reprogramming of code area flash memory, including EEPROM emulation libraries for the code areas of 78K-family products
Self Programming Library (Flash Library) 瑞萨电子
Data Flash Libraries
Libraries for the reprogramming of data flash memory, including EEPROM emulation libraries for the data areas of RL78-family products
Self Programming Library (Flash Library) 瑞萨电子
C Compiler Package for RL78 Family [CC-RL]
C Compiler Package for RL78 Family [IDE: CS+, e² studio]
Compiler/Assembler 瑞萨电子
FFT Library
Fast Fourier Transform (FFT) Library
DSP / FFT 瑞萨电子
PG-FP6
Flash memory programmer [Programming software: Dedicated GUI-based software, the "FP6 Terminal"] [Support MCU/MPU and devices: RA, RE, RX, RL78, RH850, RISC-V MCU, Renesas Synergy, Power Management, Renesas USB Power Delivery Family, ICs for Motor Driver/Actuator Driver, SuperH RISC engine, V850, 78K, R8C]
Programmer (Unit/SW) 瑞萨电子
Sound Playback/Compression System [M3S-S2-Tiny] for RL78 Family
Sound playback system for RL78 Family
Sound / Voice 瑞萨电子
FAT File System [M3S-TFAT-Tiny] for the RL78 Family
FAT file system for RL78 Family
File System 瑞萨电子
QE for Capacitive Touch: Development Assistance Tool for Capacitive Touch Sensors
In developing embedded system using the capacitive touch sensor of MCUs, you can easily setup initial configurations of the touch interface as well as process the tuning of sensors, and reduce development time. [Plugin for Renesas IDE "e2 studio"] [Standalone Version] [Support MCU/MPU:RA, RL78, RX, Renesas Synergy™]
Solution Toolkit 瑞萨电子
Crypto Library
Robust encode library to ensure security for all types of system developments
Security / Crypto 瑞萨电子
Sensor Software Modules for Renesas MCU Platforms
Middleware (FIT module and FSP module) and sample software packages that enable control and data acquisition for Renesas sensor products.
Sensor 瑞萨电子
SPI/QSPI Serial Flash Memory, QSPI Serial Phase Change Memory Driver
Device Driver for SPI and QSPI Serial Flash Memory and QSPI Serial Phase Change Memory
Serial Memory 瑞萨电子
Simulator for CS+ of RL78 Family, 78K0R and 78K0
Simulator for RL78 Family, 78K0R and 78K0 [Support IDE: CS+] (Note: This product is included in the Compiler Package and is not available separately.)
Simulator 瑞萨电子
IAR Embedded Workbench for Renesas RL78
IAR Embedded Workbench provides extensive support for RL78 devices. IAR Embedded Workbench is a complete set of development tools with leading optimization technology for creating powerful automotive applications.
IDE and Coding Tool IAR Systems
Renesas IAR Embedded Workbench Device-Support-Packages
Renesas IAR Embedded Workbench Device-Support-Packages include all device-specific files to be used with the Embedded Workbench IDE.
IDE and Coding Tool 瑞萨电子
25 items

样例程序

开发板与套件

开发板与套件

模型

RL78 Arduino 快速入门指南 - 如何将 RL78 板平台添加到 Arduino IDE 2

本视频介绍如何将瑞萨电子发布在 GitHub 上的 RL78 板添加到 Arduino IDE 2,并运行草图。

章节
00:00 开始
00:30 安装 Arduino IDE
00:49 安装工具
01:57 编写草图
02:17 设置 COM 端口
02:43 设置电路板
02:59 编译、上传、LED 闪烁

相关资源
快速入门指南页面 (GitHub)