Everything
新闻中心
投资者关系
参数搜索
Americas
Close

RX62N, RX621

100 MHz high-speed operation and built-in connectivity functions such as Ethernet and USB Host

 

RX621/RX62N Group microcontrollers have 100 MHz high-speed operation and enhanced communications functions. They have built-in Ethernet (RX62N only), CAN, and two circuits of USB 2.0 host controller. A multifunction timer (MTU2, 2 units), 10-bit or 12-bit A/D converter, DMA controller, and other peripheral functions are incorporated ona single chip. Up to 512 KB flash memory and 96 KB RAM are built in, as well as 32 KB of flash memory for data storage. Packages from 85 to 176 pins are available.

 

Main Solutions

Key Features:

RX62N

ITEM
 RX62N
CPU core RX CPU
  • General registers: 32-bit x 16
  • Multiplier: 32-bit multiplier
  • Divider: Yes
  • Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
  • Memory-protection unit (MPU)
Maximum operating frequency 100MHz
Power supply voltage 2.7 to 3.6V
Floating-point processing unit Single-precision floating-point processing unit
(Supports add/subtract/compare/multiply/divide and other instructions)
Program Flash Max. 512KB
Data Flash
 32KB
SRAM Max. 96KB
On-chip peripheral functions
  • Direct memory access controller (DMAC) x 4 channels
  • Data transfer controller (DTC)
  • Direct memory access controller designed exclusively (EXDMAC)
    x 2 channels (Over 144-pin PKG Only)
  • 16-bit multifunction timer pulse unit (MTU2) x 12 channels
  • Port output enable
  • 16-bit compare match timer x 4 channels
  • 8-bit timer (TMR) x 4 channels
  • 4-bit Programmable pulse generator (PPG) x 2 channels (max)
  • 14-bit Independent watchdog timer (IWDT)
  • 8-bit Watchdog timer (WDT)
  • Realtime clock (RTC)
  • Serial communication interface (SCI) x 6 channels
  • I2C bus interface:Except 100-pin [2 channels], 100-pin [1channel]
  • Serial peripheral interface (RSPI) x 2 channels
  • SDRAM interface (max. 32-bit width;Over 144-pin PKG Only)
  • A/D converter (10-bit) x 8 channels [4 channels x 2 units] or (12-bit) x 8 channels [8 channels x 1 unit] (12-bit and 10-bit can not use at the same time.)
  • D/A converter (10-bit): Except 100-pin [2 channels], 100-pin [1channel]
  • USB2.0FullSpeed: 176-pin [2 channels, H/F/OTG], Except 176-pin [1channel, H/F/OTG]
  • CAN x 1 channel
  • EtherC with dedicated DMAC x 1 channel
  • CRC calculator
  • Low-speed on-chip oscillator (OCO)
  • Power-on reset circuit (POR)
  • Voltage detection circuit (LVD)
On-chip debugging function Yes (with trace function)
Low power consumption modes 4 modes
  • Sleep mode
  • All-module clock stop mode
  • Software standby mode
  • Deep software standby mode
Packages PLQP0100KB-A (100-pin LFQFP, 14 x 14mm 0.5mm pitch)
PLQP0144KA-A (144-pin LFQFP, 20 x 20mm 0.5mm pitch)
PLBG0176GA-A (176-pin LFBGA, 13 x 13mm 0.8mm pitch)
PTLG0145JB-A (145-pin TFLGA, 9 x 9mm 0.65mm pitch)

 

RX621

ITEM RX621
CPU core RX CPU
  • General registers: 32-bit x 16
  • Multiplier: 32-bit multiplier
  • Divider: Yes
  • Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
  • Memory-protection unit (MPU)
Maximum operating frequency 100MHz
Power supply voltage 2.7 to 3.6V
Floating-point processing unit Single-precision floating-point processing unit
(Supports add/subtract/compare/multiply/divide and other instructions)
Program Flash Max. 512KB
Data Flash 32KB
SRAM Max. 96KB
On-chip peripheral functions
  • Direct memory access controller (DMAC) x 4 channels
  • Data transfer controller (DTC)
  • Direct memory access controller designed exclusively (EXDMAC)
    x 2 channels (Over 144-pin PKG Only)
  • 16-bit multifunction timer pulse unit (MTU2) x 12 channels
  • Port output enable
  • 16-bit compare match timer x 4 channels
  • 8-bit timer (TMR) x 4 channels
  • 4-bit Programmable pulse generator (PPG) x 2 channels (max)
  • 14-bit Independent watchdog timer (IWDT)
  • 8-bit Watchdog timer (WDT)
  • Realtime clock (RTC)
  • Serial communication interface (SCI) x 6 channels
  • I2C bus interface:Except 100-pin [2 channels], 100-pin [1channel]
  • Serial peripheral interface (RSPI) x 2 channels
  • SDRAM interface (max. 32-bit width; Over 144-pin PKG Only)
  • A/D converter (10-bit) x 8 channels [4 channels x 2 units] or (12-bit) x 8 channels [8 channels x 1 unit] (12-bit and 10-bit can not use at the same time.)
  • D/A converter (10-bit): Except 100-pin [2 channels], 100-pin [1channel]
  • USB2.0FullSpeed: 176-pin [2 channels, H/F/OTG], Except 176-pin [1channel, H/F/OTG]
  • CAN x 1 channel
  • CRC calculator
  • Low-speed on-chip oscillator (OCO)
  • Power-on reset circuit (POR)
  • Voltage detection circuit (LVD)
On-chip debugging function Yes (with trace function)
Low power consumption modes 4 modes
  • Sleep mode
  • All-module clock stop mode
  • Software standby mode
  • Deep software standby mode
Packages PLQP0100KB-A　（100－pin LFQFP, 14 x 14mm 0.5mm pitch)
PLQP0144KA-A　（144-pin LFQFP, 20 x 20mm 0.5mm pitch)
PLBG0176GA-A　（176-pin LFBGA, 13 x 13mm 0.8mm pitch)
PTLG0085JA-A　（85-pin TFLGA, 7 x 7mm 0.65mm pitch)
PTLG0145JB-A　（145-pin TFLGA, 9 x 9mm 0.65mm pitch)

Pin Count / Memory Size Lineup:

Program Flash
SRAM

512KB
96KB
384KB
64KB
256KB
64KB
Pins
Package		 85
TFLGA		 100
LFQFP		 144
LFQFP		 145
TFLGA		 176
LFBGA

 

Block Diagram:

RX62N, RX621 Block Diagram

You can find an explanation of orderable part numbers here.

Resources for Software and Hardware

Title Description
My Renesas Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information, questions and opinions with others who use Renesas products.

 

Software Design Support

Title Description
CS+ An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)
e2 studio Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.
E1 A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)
Renesas Starter Kit All the development tools you need for MCU evaluation and getting started. Also recommended for training.

 

Hardware Design Support

Title Description
IBIS/BSDL IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.
BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
Resonator Information Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.

For main clock resonators :　
KYOCERA: Click here for RX62N oscillation evaluation result.　Click here for RX621 oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F562N or R5F5621 into the IC Part Number search box.

For subclock resonators :
KYOCERA: Click here for RX62N oscillation evaluation result.　Click here for RX621 oscillation evaluation result.
您可以使用下方的筛选器来筛选样例程序和应用手册。
返回

Action Needed

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.

返回页首
使用我们的网站 | 隐私政策 | 网站地图
© 2010-2019 Renesas Electronics Corporation. All rights reserved.