This project adds WiFi connectivity using an external Silex ULPGN Wi-Fi module connected over a UART interface.
This project provides an example demonstration of the Renesas Synergy Platform connected to a Silex SX-ULPGN-EVK WiFi evaluation kit. The demonstration covers the SX-ULPGN WiFi Framework Application Programming Interface (API). It also includes the on-chip software stack and API and the Socket API for the SK-S7G2 development board. The SX-ULPGN is a single-band 2.4 GHz 802.11n module based on the Qualcomm QCA4010 System-on-Chip (SoC).
Copyright © 2018 Silex. All Rights Reserved.
The content included herein has been provided by other companies and Renesas does not claim any ownership therein. Renesas may or may not moderate or pre-screen the content included herein. Renesas requires partners to verify the functionality of their products on Synergy Platform and Renesas is not responsible in any way for the content included herein nor its quality. Renesas does not endorse any content included herein or any opinion, recommendation, or advice expressed therein, and Renesas expressly disclaims any and all liability in connection with such content, whether or not arising under the laws of copyright, libel, privacy, obscenity, or otherwise. Renesas does not provide support for any of this content; all support requirements should be directed to the owner or licensor of the content. Renesas retains the right, at its sole discretion and without prior notice, to pre-screen, refuse, or remove any content from the Synergy Platform.
支持的MCU: S7G2, S3A7, S3A3, S5D9, S5D5
Update for SSPv1.6.0
- Download Wifi_Addon_Distribution_atwinc1500_SSPv1.6.0.exe.zip file.
- Unzip the file and run the Wifi_Addon_Distribution_atwinc1500_SSPv1.6.0.exe installer.
- The destination folder should be the root folder of a compatible e2 studio installation. The default installation folder is C:\Renesas\e2_studio.