ISL70001ASEHEV1Z

Rad Hard & SEE Hard 6A Synchronous Buck Regulator Evaluation Board

Description

The ISL70001ASEHEV1Z evaluation board evaluates the ISL70001ASEH TID and SEE radiation hardened 6A synchronous buck regulator IC with integrated MOSFETs.

The ISL70001ASEHEV1Z evaluation board accepts a nominal 3V to 5.5V input voltage and provides a regulated output voltage ranging from 0.8V to 85% of the input voltage at output currents ranging from 0A to 6A. The output can be quickly set to any of six commonly used preset voltages (0.8V, 1.0V, 1.2V, 1.8V, 2.5V, 3.3V) or adjusted to an alternate voltage using the onboard potentiometer. A PGOOD (Power-Good) signal goes high and lights a red LED to indicate that the output voltage is within a ±11% typical regulation window. A toggle switch is provided to conveniently enable or disable the output voltage.

Key Features

  • ±1% Reference Voltage Over Line, Load, Temperature and Radiation
  • Current Mode Control for Excellent Dynamic Response
  • Full Mil-Temp Range Operation (TA = -55°C to +125°C)
  • 50% Lower Shutdown Supply Current than the ISL70001SEH
  • Available in a thermally enhanced heatsink package - R48.B
  • Highly Efficient: 94% Peak Efficiency
  • Operates from 3V to 5.5V Supply
  • Adjustable Output Voltage

Applications

  • FPGA, CPLD, DSP, CPU Core or I/O Voltages
  • Low-Voltage, High-Density Distributed Power Systems

ISL70001ASEHEV1Z Rad Hard Synchronous Buck Regulator Eval Board

ISL70001ASEHEV1Z Rad Hard Synchronous Buck Regulator Eval Board

Related Products

ISL70001ASEH

可订购工具信息

无结果数据

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support