概览

描述

The Renesas Starter Kit+ for RZ/A1H has been developed to speed up device evaluation, code development and so reduce time to market. An Renesas Starter Kit+, as the name suggests, is a complete development kit for the Renesas RZ/A1H device family.

* In order to make a product installer active, this product needs the Internet environment.

图像
rsk-rza1-en-ja-zh

Product Limitation

Renesas Starter Kit+ for RZ/A1H Product Limitation (22 Oct 2014)

A limitation exists on a batch of Renesas Starter Kit+ for RZ/A1H Products.

Product Affected:

Products affected are identified with number D012221#03, D012221#02, D012221#01.
Products marked with D012221#04 or greater on the type label do not have following limitation.

Limitation:

When resistor R92 is mounted on the RSK+RZA1H board, SD Host Interface does not work correctly. The identified boards were shipped with this resistor fitted.

Explanation:

The effect is to corrupt SD transfers affecting bits 1 and 5 of a byte.

Work-around:

Remove resistor R92 on the RSK+RZA1H board. (R92 is in near at the SD/MMC card socket)

图像
rsk-rza1-restriction-en-zh

Product Note

Renesas Starter Kit+ for RZ/A1H Product Note (8 Feb 2016)

Product Affected:

All products.

Explanation:

USB decoupling capacitor and VBUS power circuit of this board cannot be recommended. Please do not refer this capacitor value and USB circuit for your target system design.

Decoupling capacitor C1, C2, C4, C5, C6, C7, C9 and C10 are not recommend value.

When the RZ/A1H is used as a host controller, the additional capacity of the VBUS line should be designed to be 120μF or more.

Recommendation:

Please refer to the recommend value and guideline of Application Note "Guidelines for Hi-Speed USB 2.0 Board Design (REJ05B1216-0100) (PDF)".
In addition, please refer to RZ/A1H Group,RZ/A1M Group User's Manual: Hardware about Table 3 and 4 in Application Note.

Renesas Starter Kit+ for RZ/A1H Product Note (22 Jul 2015)

Product Affected:

Products affected are identified with number D012221#04, D012221#03, D012221#02, D012221#01.

Observation:

When resistors R128, R152, R205 and R297 are mounted on the RSK+RZA1H board, USB signals become degraded. The identified boards were shipped with this resistor fitted.

Explanation:

The effect of these 22 Ohm resistors being fitted is degradation of the D+ and D- signals.

Work-around:

R128, R152, R205 and R297 are 22 Ohm resistors. Replace these 22 Ohm resistors with 0 Ohm resistors on the RSK+RZA1H board.

Bottom side view: R128, R152, R205 and R297 are within the two red boxes.

图像
rsk-rza1-information-en-zh

Block Diagram

图像
rsk-rza1-block-en-zh

Layout and Specification

图像
rsk-rza1-layout-en-zh

Configuration

Arm DS-5 includes

  • CPU Board
  • TFT LCD Option Board
  • Detachable Colour LCD Board Pmod Compatible
  • Detachable AD Adjustment Shaft
  • Segger J-LINK Lite debugger Note 1
  • Connection cables (USB Cable, User Interface Cable)
  • Multi region power supply
  • Quick Start Guide
  • DVD-ROM
    - Documents: User Manual, Tutorial, and more
    - Arm DS-5 IDE and 32K code limited compiler (requires registration with Arm)
    - KPIT GNU compiler for Cortex®-A9
    - Segger debugger drivers
    - Sample code

e2studio includes

  • CPU Board
  • TFT LCD Option Board
  • Detachable Colour LCD Board Pmod Compatible
  • Detachable AD Adjustment Shaft
  • Segger J-LINK Lite debugger Note 1
  • Connection cables (USB Cable, User Interface Cable)
  • Multi region power supply
  • Quick Start Guide

Note:

  1. The Segger's J-Link LITE included in the evaluation kit is dedicated for the attached evaluation board. This J-Link LITE cannot be used for any other boards and products.

PC System Requirements

[ Kit with DS-5 ]

  • IBM PC/AT or compatible PC (USB interface necessary) Note 1
  • Processor Dual core 2 GHz (or equivalent)
  • Memory 4 GB or more recommended. Note 2
  • Hard disk 3 GB or more spare capacity
  • Microsoft Windows 8.1/8/7 Note 3 (other than the listed OS is not supported)

Note:

  1. IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S.
  2. 4GB or more of RAM is recommended to improve performance when debugging large images, or when using the simulation models.
  3. Windows are registered trademarks of Microsoft Corporation of the U.S.

[ Kit with e2studio ]

  • IBM PC/AT or compatible PC (USB2.0 interface necessary) Note 1
  • Processor 1.6 GHz or higher
  • Memory 1 GB or more recommended.
  • Microsoft Windows 8.1/8/7 Note 2 (other than the listed OS is not supported)

Note:

  1. IBM and PC/AT are registered trademarks of International Business Machines Corporation of the U.S.
  2. Windows are registered trademarks of Microsoft Corporation of the U.S.

特性

  • CPU Board
  • TFT LCD Option Board
  • Detachable Colour LCD Board Pmod™ Compatible
  • Detachable AD Adjustment Shaft
  • Segger J-LINK Lite debugger Note 1
  • Connection cables (USB Cable, User Interface Cable)
  • Multi region power supply
  • Quick Start Guide
  • DVD-ROM
  • Documents: User Manual, Tutorial and more
  • Arm DS-5 IDE and 32K code limited compiler (requires registration with Arm)
  • KPIT GNU compiler for Cortex®-A9
  • Segger debugger drivers
  • Sample code

文档

文档标题 类型 日期
PDF212 KB
相关文件:
应用文档
PDF373 KB
应用文档
PDF149 KB
应用文档
PDF216 KB
应用文档
PDF556 KB
应用文档
PDF346 KB
手册 - 开发工具
PDF693 KB
手册 - 开发工具
PDF3.20 MB
手册 - 开发工具
PDF459 KB
手册 - 开发工具
PDF6.27 MB
手册 - 开发工具
PDF1.55 MB
手册 - 开发工具
PDF14.44 MB
手册 - 开发工具
PDF1.52 MB
手册 - 开发工具
ZIP0 KB
其他
PDF328 KB
相关文件:
Release Note
PDF70 KB
Release Note
PDF367 KB
Tool News - Notification

设计和开发

软件与工具

软件下载

文档标题 类型 日期
ZIP26.75 MB
PCB设计文档
ZIP96.24 MB
软件和工具 - 其他
ZIP554 KB
软件和工具 - 其他
ZIP1,043.55 MB
软件和工具 - 其他
ZIP0 KB
软件和工具 - 其他

样例程序

样例程序

文档标题 Type Date
ZIP81.60 MB
Application: Consumer Electronics, Industrial, Key Technology, Medical and Healthcare Solutions
Compiler: ARMCC, IAR C/C++ Compiler for ARM
Function: Application Example, BSP, Communication Interface, HMI, System
IDE: e2 studio, IAR EWARM
样例程序
ZIP50.54 MB
Compiler: GNUARM-NONE
Function: Application Example, BSP, Communication Interface, HMI, OS, System
IDE: e2 studio
样例程序
ZIP11.86 MB
Compiler: GNUARM-NONE
IDE: e2 studio
样例程序
ZIP760 KB
Compiler: GNUARM-NONE
IDE: e2 studio
样例程序
ZIP1.15 MB
Compiler: GNUARM-NONE
IDE: e2 studio
样例程序
ZIP44.76 MB
Compiler: ICCARM
IDE: IAR EWARM
样例程序
ZIP3.85 MB
Compiler: GNUARM-NONE
IDE: e2 studio
样例程序