The ISL78263EVAL1Z evaluation board is used to evaluate the dual-converter, synchronous buck-and-boost operation of the ISL78263 controller. The board evaluates Channel 1, a synchronous buck operation that provides a system rail voltage, and Channel 2, a boost converter that is activated to support automotive cold crank applications. In addition, the ISL78263EVAL1Z enables evaluation of ISL78263 features such as overcurrent protection, overvoltage and under-voltage protection, and power-good indicators for each channel.


  • VIN operating range: 2.1V to 42V
  • Selectable continuous conduction mode (CCM) or energy conservation mode (ECM) allowed
  • Low quiescent current in ECM mode: 6μA typical, buck channel
  • Switching frequency: 200kHz to 2.2MHz
  • Boost frequency at 1x or 0.2x the buck frequency
  • Drop-out mode (buck) for high duty-cycle operation
  • 25ns on-times for low duty cycle operation
  • External synchronization input
  • Programmable spread spectrum clocking
  • 2A sourcing/3A sinking MOSFET drivers
  • Boot UVLO and programmable boot refresh time
  • Extensive protection mechanisms for OV/UV/OC/OT
  • Monitoring test points for key signals


  • Automotive battery supplied applications
  • In cabin systems
  • Advanced Driver Assist Systems (ADAS)
  • Start-stop protected systems (such as head units, clusters, e-Mirrors)


文档标题 language 类型 文档格式 文件大小 日期
star ISL78263EVAL1Z User's Manual Rev.1.01 手册 - 硬件 PDF 1.36 MB
ISL78263 Datasheet 数据手册 PDF 1.82 MB


文档标题 language 类型 文档格式 文件大小 日期
ISL78263EVAL1Z Design Files PCB设计文档 ZIP 2.41 MB