The 8V19N882 is a fully integrated FemtoClock® RF Sampling Clock Generator and Jitter Attenuator designed as a high-performance clock solution for conditioning and frequency/phase management of wireless base station radio equipment boards. The device is optimized to deliver excellent phase noise performance as required in 4G, 5G and including mmWave radio implementations.

The device supports JESD204B (subclass 0 and 1) and JESD204C. A two-stage PLL architecture supports both jitter attenuation and frequency multiplication. The first stage PLL is the jitter attenuator and uses an external VCXO for the best possible phase noise characteristics. The second stage PLL locks on the first PLL output signal and synthesizes the target frequency. The second stage PLL can use the internal or an external high-frequency VCO.

The device generates the high-frequency clocks and the low-frequency synchronization signals (SYSREF) from the selected VCO. SYSREF signals are internally synchronized to the clock signals. The integrated signal delay blocks can be used to achieve phase alignment, controlled phase offsets between system reference and clock signals and to align/delay individual output signals. The two redundant inputs are monitored for activity. Four selectable clock switching modes are provided to handle clock input failure scenarios. Auto-lock, individually programmable output frequency dividers, and phase adjustment capabilities are added for flexibility.

The device is configured through a 3/4-wire SPI interface and reports lock and signal loss status in internal registers and via the GPIO[1:0] outputs. Internal status bit changes can also be reported via a GPIO output.

For information regarding evaluation boards and material, please contact your local sales representative.

特性

  • High-performance clock RF sampling clock generator and clock jitter attenuator with support for JESD204B/C
  • Low phase noise: -144.7dBc/Hz (800kHz offset; 491.52MHz)
  • Integrated phase noise of 74fs RMS (12kHz–20MHz, 491.52MHz)
  • Dual-PLL architecture with internal and optional external VCO
  • Eight output channels with a total of 16 outputs
  • Configurable integer clock frequency dividers
  • Clock output frequencies: up to 3932.16MHz (Internal VCO) and 6GHz (optional external VCO)
  • Differential, low noise I/O
  • Deterministic phase delay and integrated phase delay circuits
  • Redundant input clock architecture with two inputs and monitors, holdover and input switching
  • SPI 3/4 wire configuration interface
  • Supply voltage: 1.8V, 2.5V and 3.3V
  • Package: 76-VFQFN (9 × 9 mm²)
  • Temperature range: -40°C to +105°C (board)

tune产品选择

器件号 Part Status Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
Active VFQFPN 76 I 是的 Tray
Availability
Active VFQFPN 76 I 是的 Reel
Availability
Active VFQFPN 76 I 是的 Reel
Availability

description文档

文档标题 language 类型 文档格式 文件大小 日期
数据手册与勘误表
star 8V19N882 Datasheet 数据手册 PDF 1.08 MB
使用指南与说明
8V19N88x Hardware Design Guide 指南 PDF 409 KB
应用指南 & 白皮书
AN-842 Thermal Considerations in Package Design and Selection 应用文档 PDF 495 KB
AN-838 Peak-to-Peak Jitter Calculations 应用文档 PDF 115 KB
AN-839 RMS Phase Jitter 应用文档 PDF 233 KB
AN-815 Understanding Jitter Units 应用文档 PDF 565 KB
AN-827 Application Relevance of Clock Jitter 应用文档 PDF 1.15 MB
AN-805 Recommended Ferrite Beads 应用文档 PDF 121 KB
AN-806 Power Supply Noise Rejection 应用文档 PDF 438 KB
其他
RF Timing Family Product Overview 概览 PDF 331 KB
IDT Clock Generation Overview 日本語 概览 PDF 1.83 MB

file_download下载

文档标题 language 类型 文档格式 文件大小 日期
软件
Timing Commander Personality File for 8V19N882 (v2.1.0) Software & Tools - Other TCP 5.19 MB

memory开发板与套件

器件号 文档标题 类型 Company
8V19N882-EVK 8V19N882 Evaluation Kit 评估 Renesas