IDT's PLL-based clock generators offer sub-picosecond jitter, low-skew clock outputs, and edge rates that meet the ever-growing demands of today's networking solutions. The 871S1022 is a PLL-based clock generator specifically designed for PCI Express® Clock Generation applications. The device generates 100MHz, 125MHz, 250MHz or 500MHz from either a 25MHz fundamental mode crystal or a 100MHz recovered clock. The 871S1022 has two modes of operation: (1) high frequency jitter attenuator and (2) high performance clock synthesizer mode. When in jitter attenuator mode, the 871S1022 is able to both suppress high frequency noise components and function as a frequency translator. Designed to receive a jittery and noisy clock from an external source, the 871S1022 uses FemtoClock® technology to clean up the incoming clock and translate the frequency to one of the four common PCI Express® frequencies. When in synthesizer mode, the device is able to generate high performance SSC and non-SSC clocks from a low cost external, 25MHz, fundamental mode crystal. The 871S1022 uses FemtoClock® technology to generate low noise clock outputs capable of providing the seed frequencies for the common PCI Express® link rates.


  • Four 0.7V differential output pairs
  • One differential clock input pair
  • CLK, nCLK pair can accept the following differential input levels: LVPECL, LVDS, LVHSTL, HCSL
  • Crystal oscillator interface designed for 25MHz, 18pF parallel resonant crystal
  • RMS phase jitter @ 100MHz, using a 25MHz crystal (12kHz - 20MHz): 0.608ps (typical)
  • High frequency jitter attenuator mode has high PLL bandwidth which allows for better input tracking
  • Supports PCI Express® Spread-Spectrum Clocking
  • PCI Express® Gen 1, 2 and 3 jitter compliant
  • 3.3V operating supply voltage
  • 0°C to 70°C ambient operating temperature
  • Available in lead-free (RoHS 6) package


器件号 Part Status Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
Active VFQFPN 32 C 是的 Tray
Active VFQFPN 32 C 是的 Reel


文档标题 language 类型 文档格式 文件大小 日期
871S1022 Datasheet 数据手册 PDF 862 KB
PCN# : A1904-01 Add Greatek, Taiwan as an Alternate Assembly Facility 产品变更通告 PDF 983 KB
PCN# : A1611-02 Add JCET China as Alternate Assembly and Change of Material Set at Alternate Assembly Location 产品变更通告 PDF 583 KB
PCN# : A1511-01(R1) Add SPEL India as Alternate Assembly Location 产品变更通告 PDF 596 KB
PCN# : A1511-01 Add SPEL India as Alternate Assembly Location 产品变更通告 PDF 544 KB