概览

简介

Quickly evaluate the amplifier, filter and analog-to-digital converter (ADC) signal chain's total performance in your application. Pairing with Renesas' ADC KMB-001LEVALZ motherboard, this amplifier + ADC daughterboard provides a 100kHz to 100MHz flat data acquisition channel requiring only 200mV p-p (-10dBm) full scale input signal. It interfaces directly with Renesas' proven ADC analysis Konverter software. Typically consuming <680mW in the amplifier + ADC, this example design also offers a starting point for customizing this board to specific end equipment requirements.

The input transformers, amplifier gain and interstage filter design can be tuned for a given application, allowing a user to try different circuit configurations to evaluate performance tradeoffs. In addition, the 12-bit 500MSPS ADC can be swapped out for any of the 20-pin compatible ADCs from the Renesas ADC family. These low power ADC's span the 8- to 14-bit range with max sample rates from 125MSPS to 500MSPS.

特性

  • Clock rate range: 200MSPS to 500MSPS
  • 200mV p-p input (-10dBm) for -1dBFS ADC input
  • ±0.5dB flat response: 100kHz to 100MHz
  • Typical SNR: 65dBFS
  • Typical SFDR: 82dBC @ -1dBFS input (10MHz to 100MHz analog input)

应用

应用

  • Radar and electronic/signal intelligence
  • Broadband communications
  • High-performance data acquisition
  • Low power, high dynamic range ADC interface
  • Differential mixer output amplifier
  • SAW filter pre/post driver
  • Differential Comms-DAC output driver

文档

类型 文档标题 日期
指南 PDF 1.02 MB
数据手册 PDF 1.65 MB
数据手册 PDF 1.36 MB
3 items

设计和开发

软件与工具

软件下载

类型 文档标题 日期
PCB设计文档 PDF 56 KB
PCB设计文档 PDF 959 KB
软件和工具 - 软件 EXE 162.95 MB
PCB设计文档 ZIP 246 KB
PCB设计文档 ZIP 4.49 MB
软件和工具 - 软件 EXE 1.00 MB
6 items