概要

Description

The ZSSC3135 is a member of the ZSSC313x product family of CMOS integrated circuits designed for automotive and industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and nonlinearity of the connected sensor element. The required calibration coefficients are stored by the single-pass calibration procedure in an on-chip EEPROM. The ZSSC3135 is specially designed for piezo-resistive bridge sensor elements. The amplification stage with an analog gain of 105 in combination with the optional temperature compensation using an external temperature sensor fits the requirements of piezo-resistive sensor applications perfectly.

特長

  • Adjustable to nearly all resistive bridge sensor types, analog gain of 105, overall gain up to 420
  • Sample rate up to 200 Hz
  • ADC resolution 13/14 bit
  • Safety functionality sensor connection
  • External temperature sensor
  • Digital compensation of sensor offset, sensitivity, temperature drift and nonlinearity
  • Output options: ratiometric analog voltage output (5% to 95% maximum, 12.4 bit resolution) or ZACwire™ (digital one-wire-interface)
  • Sensor biasing by voltage
  • High voltage protection up to 33V
  • Supply current: max. 5.5mA
  • Reverse polarity and short circuit protection
  • Operation temperature range as wide as -40°C to +150°C
  • Traceability by user-defined EEPROM entries

ドキュメント

タイトル 分類 日付
PDF346 KB
データシート
PDF427 KB
アプリケーションノート
PDF1.14 MB
アプリケーションノート
PDF273 KB
アプリケーションノート
PDF150 KB
データシート-簡略版
7Z1.21 MB
ガイド
PDF2.28 MB
マニュアル-開発ツール
PDF1.13 MB
マニュアル-ハードウェア
PDF440 KB
技術概要
 

設計・開発

ソフトウェア/ツール

ソフトウェアダウンロード

タイトル 分類 日付
ZIP931 KB
ソフトウェア/ツール-評価版ソフトウェア
 

ボード&キット

ボード&キット

モデル

ビデオ&トレーニング

IDT Sensor Signal Conditioner (SSC) Evaluation Kit Overview

A brief introduction and overview of IDT's sensor signal conditioner evaluation kits. Evaluation kits generally consist of three parts: a communication interface board,  a device board, and a sensor simulator board - all connected together. A sophisticated software GUI accompanies the kit, enabling an engineer to learn how to use the part rapidly, do quick prototyping, and practice calibrations.

Presented by David Grice, applications engineer at IDT. For more information about IDT's sensor signal conditioner products, visit https://www.idt.com/ssc